Front Panel And Normal Operations Description - Optus CG3000-1STAUS User Manual

Front Panel description
The front panel of your WiFi Cable Modem provides status LED's that indicate how well and what state
your WiFi Cable Modem is operating. See below table for more information on front panel LED status
indicator functions.
1. POWer
2. dS
3. US
4. iNTerNeT
5. LAN 1-4
6. TeL2
7. TeL1
8. WireLeSS LiNK
9. WPS
1382777E 0411 166321.indd 3
1 2 3 4
ON, power is applied to the WiFi Cable modem
ON, the WiFi Cable modem is receiving data from the cable network
ON, the WiFi Cable modem is sending data to the cable network
ON, the WiFi Cable modem is registered on the network and fully operational
ON, a device is connected to one of the Ethernet ports
BLiNKiNG indicates that data is being transferred over the Ethernet connection
ON indicates telephony service is enabled. Blinks when line 2 is in use
OFF indicates that phone service for TEL 2 is not enabled
ON indicates telephony service is enabled. Blinks when line 1 is in use
OFF indicates that phone service for TEL 1 is not enabled
By default, the wireless modem router is set up to work as a wireless access point.
Pressing this button turns the wireless access point feature on and off. You can also do
this through the Wireless Settings screen.
You can use the Wi-Fi Protected Setup (WPS) feature with clients on the network that are
Wi-Fi certified and WPA capable.
5 6 7 8 9
FRONT PANEL DESCRIPTION 3
7/04/11 10:42 AM