Call Duration; Packet Data; Monitor All Communication Events - Nokia N91 - Smartphone 30 MB User Manual

Tip! When you see a note in the standby mode about
missed calls, select
calls. To call back, scroll to a name or number, and
press .
To clear all recent call lists, select
calls in the recent calls main view. To clear one of the call
registers, open the register you want to erase, and select
Options > Clear list. To clear an individual event, open a
register, scroll to the event, and press

Call duration

To monitor the approximate duration of your incoming
and outgoing calls, press
Call duration.
To set the display of the call duration while a call is active,
select My Own >
duration. Select Yes
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To clear call duration timers, select
timers. For this you need the lock code, see 'Security',
'Phone and SIM', p. 103.
76 Copyright © 2006 Nokia. All rights reserved.
Show to access the list of missed
Options > Clear recent
.
, and select My Own >Log
Log > Options > Settings >
or No.
Options >

Packet data

To check the amount of data sent and received during
packet data connections, press
Own >Log >
charged for your packet data connections by the amount
of data sent and received.

Monitor all communication events

Icons in Log:
Incoming
Outgoing
Missed communication events
>
To monitor all voice calls, text messages, or data
connections registered by the device, press
Own > Log, and scroll right to open the general log. For
Show call
each communication event, you can see the sender or
recipient name, phone number, name of the service
provider, or access point. You can filter the general log to
view just one type of event and create new contact cards
based on the log information.
Clear Tip! If you want to see the duration of a voice call on
the main display during an active call, select
Settings >
Tip! To view a list of sent messages, press
select Messaging
, and select
Packet data. For example, you may be
Show call duration > Yes.
> Sent.
My
, select My
Options >
, and