Answer Or Reject A Call; Call Waiting (Network Service) - Nokia N91 - Smartphone 30 MB User Manual

2
A short tone is played, and
clearly the name or nickname that is saved on the
contact card.
3
The device plays a synthesised voice tag for the
recognised contact in the selected device language,
and displays the name and number. After a timeout of
1.5 seconds, the device dials the number.
If the recognised contact was not correct, select
to view a list of other matches, or
dialling.
If several numbers are saved under the name, the device
selects the default number, if it has been set. Otherwise
the device selects the first available number of the
following: Mobile,
Telephone, Tel. (home), and

Answer or reject a call

To answer the call, press
To mute the ringing tone when a call comes in, select
Silence.
Tip! You can also use the
control to answer and end a call.
If you do not want to answer a call, press
it. If you have activated the
34 Copyright © 2006 Nokia. All rights reserved.
Speak now is displayed. Say
Quit to cancel voice
Mobile (home), Mobile (business),
Tel. (business).
or open the slide cover.
key on the remote
Call divert > If busy
to divert calls, rejecting an incoming call also diverts the
call. See 'Call diverting', p. 107.
When you reject an incoming call, you can also select
text message
why you cannot answer the call. You can edit the text
before sending it. To set up this option and write a
standard text message, see 'Call settings', p. 98.
Next

Call waiting (network service)

You can answer a call while you have another call in
progress if you have activated
Call > Call waiting.
Tip! To change the device tones for different
environments and events, for example, when you want
your device to be silent, see 'Profiles—Set tones', p. 29.
To answer the waiting call, press
on hold.
To switch between the two calls, select Swap. Select
Options > Transfer
on hold with an active call and to disconnect yourself from
the calls. To end the active call, press
calls, select Options
to reject
function
to send a message to the caller informing
Call waiting
. The first call is put
to connect an incoming call or a call
> End all calls.
Send
in Settings >
. To end both