Motorola ELECTRIFY M User Manual page 51

Connect & transfer
Connect & transfer
Quick start: Connect & transfer
Bluetooth® wireless
Wi-Fi Networks
USB cables
Memory card & file management
Share your data connection
Data use
NFC
Your cloud
Phone & tablet
DLNA™ media devices
Virtual Private Networks (VPN)
Mobile network
Airplane mode
Menu More
Back Next
Wi-Fi Networks
Turn Wi-Fi power on/off
Settings
Find it: Apps > , then touch the
switch to turn it .
ON
Note: To extend battery life, turn the Wi-Fi switch
when you're not using it.
Connect to networks
To find networks in your range:
Settings
1 Touch Apps > >
Tip: To see your phone's MAC address and Wi-Fi
Advanced
settings, touch Menu >
2 Make sure the switch at the top is
SCAN
.
3 Touch a found network to connect it (if necessary,
Network SSID Security
enter , , and
Connect
and touch ).
When your phone connects, the Wi-Fi status
indicator appears in the status bar.
Note: If you see a question mark in the Wi-Fi status
indicator , pull down the status bar, touch the
network, and enter the network's password.
Tip: When Wi-Fi power is on, your phone automatically
reconnects to available networks it has used before
Manage networks
To remove a network, touch it in the list, then touch
Forget
Wi-Fi
To manage your networks, touch Apps
Wi-Fi
>
OFF
Manage Networks
>
Wi-Fi hotspot
Your can make your phone a Wi-Fi hotspot to provide
portable, convenient internet access to other Wi-Fi
Wi-Fi
enabled devices.
.
Note: Keep it secure. To protect your phone and hotspot
. from unauthorized access, it is strongly recommended
that you set up hotspot security (WPA2 is the most
, then touch
ON
secure), including password.
Find it: Apps
Hotspot
Wireless password
,
1 Your phone turns off
network for Internet access. Touch
Settings
• SSID—Enter a unique name for your hotspot.
• Security—Select the type of security you want:
.
, turn Wi-Fi power on, then touch Menu
.
Settings Tethering & Mobile
> >
Mobile Hotspot
and check .
Wi-Fi
power and uses the mobile
Mobile Hotspot
Configure Mobile Hotspot
> to set up security:
Open WPA2 WPA2
or . For , enter a unique password
that others will need to access your Wi-Fi hotspot.
WPA2
Note: is recommended by IEEE.
Settings
>