Electrolux Energy Star WT65H208DU Instruction Manual page 17

How to fill the salt container
• Switch off the dishwasher by pressing button "A"
(Figure 13).
• Unscrew cap "A" (Fig. 18) of the salt container, tur-
ning it anticlockwise.
A
Fig. 18
• Pour approx. 1.5 kg of coarse salt [NaCl] in container "A"
(an amount sufficient to fill the salt container up to the rim)
using the special funnel supplied (Fig. 19).
NaCl
(1,5 kg)
Fig. 19
IMPORTANT:
!
only salt may be placed in the salt con-
tainer. Do not introduce any other chem-
ical substances such as detergent, rinse
aid or descaling agent, since these
would inevitably damage the appliance.
Such damage invalidates any warranty
and relieves the manufacturer of all lia-
bility.
• Remove any traces of salt from the filling hole, the
container thread and the closing cap seal.
• Refit the cap of container "A", turning it clockwise and
making sure it is tight.
IMPORTANT:
!
SAL 0
The message
several wash cycles even after topping-
up the salt, as the salt must circulate in
the entire system. Correct operation of
the dishwasher is not, however, affec-
ted.
The salt container always has water in it, therefore it is
normal if water comes out during filling.
may appear for
19