Table of Contents
Advertisement
Frequently Asked Questions
Problem
When I drive at night, the screen is bright and will not switch
to the night display mode. Why?
The daytime map screen is dark like the night display mode,
and it is hard to see. Why?
Once I press the Display Mode button
longer automatically switches between day and night display
modes. Why is this?
How can I input my destination using map coordinates?
How do I change or remove my PIN?
I forgot the PIN for Home, or the PIN for personal addresses
(User 1 or User 2). How do I reset it?
CALL is not available on the Calculate route to screen.
Why?
142 Navigation System
Verify the following: The nighttime dash brightness control is not set to
maximum, and Map Color in SETUP is set to Black for Night. See
Switching Display Mode Manually on page 113.
Verify the following: The Map Color in SETUP is set to White for Day.
See Switching Display Mode Manually on page 113.
, the screen no
This is normal. Once you press the Display Mode button
manually controlling the display mode. Your manual display mode setting is
canceled the next time the vehicle is started.
The navigation system was not designed for this. However, you can view
the coordinates of an address by pushing in on the Interface Dial, selecting
Show Icon on Map, and moving the Interface Dial left to select
Current Location. See Map Screen Legend on page 55.
Go to "Personal Information" in the SETUP screen (Other), and select PIN
Number. Select User 1 or User 2 and enter your existing PIN, and then
you have the choice to change or remove the PIN. See page 97.
PINs are optional. See information regarding PINs on page 97. Your dealer
can reset the PIN for you.
Your phone is not paired to the HFL, or if your phone is paired, it is in use
or does not have good coverage; press the HFL BACK button.
Solution
, you are
Advertisement
Table of Contents
