1. Manuals
  2. Brands
  3. Acer Manuals
  4. Laptop
  5. Aspire 5241 Series
  6. Service manual

Acer Aspire 5241 Series Service Manual

Hide thumbs Also See for Aspire 5241 Series:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Quick Manual
Aspire 5241 Series
Service Guide
Service guide files and updates are available
on the ACER/CSD web; for more information,
please refer to
http://csd.acer.com.tw
PRINTED IN TAIWAN

Advertisement

Table of Contents
loading

Related Manuals for Acer Aspire 5241 Series

Summary of Contents for Acer Aspire 5241 Series

  • Page 1 Aspire 5241 Series Service Guide Service guide files and updates are available on the ACER/CSD web; for more information, please refer to http://csd.acer.com.tw PRINTED IN TAIWAN...

  • Page 2: Revision History

    Revision History Please refer to the table below for the updates made on Acer Aspire 5241 Series service guides. Date Chapter Updates...
  • Page 3 Copyright Copyright © 2009 by Acer Incorporated. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of Acer Incorporated.
  • Page 4 Conventions The following conventions are used in this manual: Denotes actual messages that appear SCREEN MESSAGES on screen. NOTE Gives bits and pieces of additional information related to the current topic. WARNING Alerts you to any damage that might result from doing or not doing specific actions.
  • Page 5 DIFFERENT part number code to those given in the FRU list of this printed Service Guide. You MUST use the list provided by your regional Acer office to order FRU parts for repair and service of customer machines.

  • Page 7: Table Of Contents

    Special Key ........... . .13 Acer GridVista (dual-display compatible) ......13 Hardware Specifications and Configurations .
  • Page 8 Table of Contents Removing the Power Board ........63 Removing the Left Speaker Module .
  • Page 9 Acer Aspire 5241 Series FRU List ........
  • Page 10 Table of Contents...

  • Page 11: System Specifications

    Chapter 1 System Specifications Features Below is a brief summary of the computer’s many features: Operating System • Genuine Windows® 7™ Platform • urion II dual-core processor* ™ • thlon 64 II dual-core processor* ™ • AMD Sempron processor* ™ •...

  • Page 12: Dimensions And Weight

    Dimensions and Weight • 372.3 (W) x 246.5 (D) x 26.8/39.6 (H) mm (14.4 x 10.8 x 1.1/1.5 inches) • 2.7 kg (6.0 lbs.) with 6-cell battery pack Communication • Integrated Acer Crystal Eyes webcam* • WLAN: • Acer InviLink 802.11b/g/Draft-N* ™...

  • Page 13: System Block Diagram Tbd

    System Block Diagram TBD Chapter 1...

  • Page 14: Your Acer Notebook Tour

    Your Acer Notebook tour After knowing your computer features, let us show you around your new computer. Front View Icon Item Description Acer Crystal Eye Web camera for video communication webcam (for selected models). Display screen Also called Liquid-Crystal Display (LCD), displays computer output.

  • Page 15: Closed Front View

    Icon Item Description TouchPad Touch-sensitive pointing device which functions like a computer mouse. Click buttons (left The left and right buttons function like the left and right) and right mouse buttons. Palmrest Comfortable support area for your hands when you use the computer. Indicates when the hard disk drive is active.

  • Page 16: Rear View

    Rear View Icon Item Description Ventilation slots Enable the computer to stay cool, even after prolonged use. Left View Icon Item Description DC-in jack Connects to an AC adapter Ethernet (RJ-45) Connects to an Ethernet 10/100-based port network. External display Connects to a display device (VGA) port (e.g.

  • Page 17: Right View

    Right View 2 3 4 Item Description Optical drive Internal optical drive; accepts CDs or DVDs. Optical disk access Lights up when the optical drive is active. indicator Optical drive eject button Ejects the optical disk from the drive. Emergency eject hole Ejects the optical drive tray when the computer is turned off.

  • Page 18: Indicators

    Icon Item Description Battery bay Houses the computer's battery pack. Battery release Releases the battery for removal. latch Battery lock Locks the battery in position. Hard disk bay Houses the computer's hard disk (secured with screws). Memory Houses the computer's main memory. compartment Ventilation slots Enable the computer to stay cool, even after...

  • Page 19: Touchpad Basics

    TouchPad Basics The following items show you how to use the TouchPad: • Move your finger across the TouchPad (1) to move the cursor. • Press the left (2) and right (3) buttons located beneath the TouchPad to perform selection and execution functions.

  • Page 20: Using The Keyboard

    Using the Keyboard The keyboard has full-sized keys and an embedded numeric keypad, separate cursor, lock, Windows, function and special keys. Lock Keys and embedded numeric keypad The keyboard has three lock keys which you can toggle on and off. Lock key Description Caps Lock...

  • Page 21: Windows Keys

    Windows Keys The keyboard has two keys that perform Windows-specific functions. Description Windows key Pressed alone, this key has the same effect as clicking on the Windows Start button; it launches the Start menu. It can also be used with other keys to provide a variety of functions: : Open or close the Start menu <...

  • Page 22: Hot Keys

    Hot Keys The computer employs hotkeys or key combinations to access most of the computer’s controls like screen brightness, volume output and the BIOS utility. To activate hot keys, press and hold the <Fn> key before pressing the other key in the hotkey combination. Hotkey Icon Function...

  • Page 23: Special Key

    Hold <Shift> and then press the <4> key at the upper-center of the keyboard. NOTE: This function varies by the operating system version. Acer GridVista (dual-display compatible) NOTE: This feature is only available on certain models. To enable the dual monitor feature of the notebook, first ensure that the second monitor is connected, then select Start, Control Panel, Display and click on Settings.
  • Page 24 Acer GridVista is a handy utility that offers four pre-defined display settings so you can view multiple windows on the same screen. To access this function, please go to Start All Programs and click on Acer GridVista. You may choose any one of the four display settings indicated below: Double (vertical), Triple (primary at left), Triple (primary at right), or Quad Acer Gridvista is dual-display compatible, allowing two displays to be partitioned independently.

  • Page 25: Hardware Specifications And Configurations

    Power 35W (25W for Sempron Processor) On-die Cache Up to 1MB L2 cache Front Side Bus 667/800/1066MHz Processor Specifications Cache Core Item Cores Package Acer P/N Speed Speed Tech Size Voltage AAM300 2.0 GHz KC.AM002.300 AAM320 2.1 GHz 35 W KC.AM002.320...
  • Page 26 Item Specification BIOS ROM type Flash Features • Flash ROM 1MB • Support ISIPP • Support Acer UI • Support multi-boot • Suspend to RAM (S3) • Various hot-keys for system control • Support SMBIOS 2.3, PCI2.2. • DMI utility for BIOS serial number configurable/asset tag •...
  • Page 27 Memory Combinations Slot 1 Slot 2 Total Memory 512MB 512MB 1024MB 1024MB 2048MB 2048MB 512MB 512MB 1024MB 512MB 1024MB 1536MB 512MB 2048MB 2560MB 1024MB 1024MB 1024MB 512MB 1536MB 1024MB 1024MB 2048MB 1024MB 2048MB 3072MB 2048MB 2048MB 2048MB 512MB 2560MB 2048MB 1024MB 3072MB 2048MB...
  • Page 28 Item Specification Spindle speed 5400 5400 5400 5400 (RPM) Performance Specifications Buffer size 8 MB 8 MB 8 MB 8 MB Interface SATA SATA SATA SATA Internal transfer 395~952 rate (Mbits/sec, (typical) max) I/O data transfer 300 maximum rate (Mbytes/sec max) DC Power Requirements Voltage...
  • Page 29 Item Specification Applicable disc DVD-ROM: DVD Read: • formats DVD-ROM (DVD-5, DVD-9, DVD-10, DVD- 4.7GB (Single Layer) • 18), DVD-Video, DVD-Audio, SACD (Hybrid), 8.5GB (Dual Layer) • UDF DVD, DVD-R, DVD-R DL, DVD-R 3.95 DVD-R: • GB, DVD-R Authoring, DVD-R Multi-Border, 3.95GB (Ver.
  • Page 30 Speakers Item Specification Vendor and Model Dimensions Weight Nominal Impedance 4Ohm Power Rating Output Sound Pressure Level Frequency Range Distortion Microphone Item Specification Vendor and Model Directivity Current Consumption S/N Ratio Frequency Power and Keyboard Controller Item Specification Controller EM-7Tv2 Package Features •...
  • Page 31 Item Specification Display Mode Normal (white) Typical White Luminance (cd/m (also called Brightness) Contrast Ratio 500:1 Response Time (Optical Rise Time/Fall Time) msec Input Voltage Typical Power Consumption 5.75 (watt) Weight (with inverter) Physical Size (mm) 359.3 x 209.5 x 5.9 Electrical Interface LVDS Support Color...
  • Page 32 Chapter 1...

  • Page 33: System Utilities

    Chapter 2 System Utilities BIOS Setup Utility The BIOS Setup Utility is a hardware configuration program built into your computer’s BIOS (Basic Input/ Output System). Your computer is already properly configured and optimized, and you do not need to run this utility. However, if you encounter configuration problems, you may need to run Setup.

  • Page 34: Aspire 5241 Bios

    Aspire 5241 BIOS Information The Information screen displays a summary of your computer hardware information. I n s y d e H 2 0 S e t u p U t i l i t y R e v 3 . 5 Information M a i n Security...

  • Page 35: Main

    Main The Main screen allows the user to set the system time and date as well as enable and disable boot option and recovery. I n s y d e H 2 0 S e t u p U t i l i t y R e v 3 .

  • Page 36: Security

    Security The Security screen contains parameters that help safeguard and protect your computer from unauthorized use. InsydeH20 Setup Utility Information Main Security Boot Exit Item Specific Help Supervisor Password Is: Supervisor Password Is: Clear Clear User Password Is: User Password Is: Clear Clear Supervisor Password...

  • Page 37: Setting A Password

    Setting a Password Follow these steps as you set the user or the supervisor password: Use the ↑ and ↓ keys to highlight the Set Supervisor Password parameter and press the Enter key. The Set Supervisor Password box appears: S e t S u p e r v i s o r P a s s w o r d E n t e r N e w P a s s w o r d C o n f i r m N e w P a s s w o r d Type a password in the “Enter New Password”...

  • Page 38: Changing A Password

    Changing a Password Use the ↑ and ↓ keys to highlight the Set Supervisor Password parameter and press the Enter key. The Set Password box appears. S e t S u p e r v i s o r P a s s w o r d E n t e r C u r r e n t P a s s w o r d E n t e r N e w P a s s w o r d C o n f i r m N e w P a s s w o r d...

  • Page 39: Boot

    Boot This menu allows the user to decide the order of boot devices to load the operating system. Bootable devices includes the USB diskette drives, the onboard hard disk drive and the DVD drive in the module bay. Select Boot Devices to select specific devices to support boot. I n s y d e H 2 O S e t u p U t i l i t y R e v .

  • Page 40: Exit

    Exit The Exit screen allows you to save or discard any changes you made and quit the BIOS Utility. I n s y d e H 2 0 S e t u p U t i l i t y R e v .

  • Page 41: Bios Flash Utilities

    BIOS Flash Utilities The BIOS flash memory update is required for the following conditions: • New versions of system programs • New features or options • Restore a BIOS when it becomes corrupted. Use the Phlash utility to update the system BIOS flash ROM. NOTE: If you do not have a crisis recovery diskette at hand, then you should create a Crisis Recovery Diskette before you use the Phlash utility.

  • Page 42: Dos Flash Utility

    DOS Flash Utility Perform the following steps to use the DOS Flash Utility: Press F2 during boot to enter the Setup Menu. Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move USB HDD to position 1.

  • Page 43: Winflash Utility

    In flash BIOS, the message Please do not remove AC Power Source displays. C:\NDWG0\ndwg005a\ndwg005 C:\NDWG0\ndwg005a\flashit ndwg005.fd /b /fe /dc Please do not remove the AC power! C:\NDWG0\ndwg005a\ Plug in the AC power to continue. Flash is complete when the message Flash programming complete displays. WinFlash Utility Perform the following steps to use the WinFlash Utility: Double-click the WinFlash executable.

  • Page 44: Remove Hdd/Bios Password Utilities

    Remove HDD/BIOS Password Utilities This section provides you with details about removing HDD/BIOS password: Remove HDD Password: If you key in the wrong HDD password three times, an error is generated. To reset the HDD password, perform the following steps: An error code is generated for unlocking the HDD.
  • Page 45 Removing BIOS Passwords: To clear the User or Supervisor passwords through hardware, open the RAM door and use a metal instrument to short the “RTC_RST” point. Cleaning BIOS Passwords To clean the User or Supervisor passwords using software utilites, perform the following steps: From a DOS prompt, execute clnpwd.exe Press 1 or 2 to clean the desired password shown on the screen.

  • Page 46: Using Boot Sequence Selector

    The onscreen message determines whether the function is successful or not. Using Boot Sequence Selector The Boot Sequence Selector allows the boot order to be changed without accessing the BIOS. To use Boot Sequence Selector, perform the following steps: Enter into DOS. Execute BS.exe to display the usage screen.
  • Page 47 The following examples show the commands and the corresponding output information. Read DMI Information from Memory Input: dmitools /r Output: Manufacturer (Type1, Offset04h): Acer Product Name (Type1, Offset05h): Aspire xxxx Serial Number (Type1, Offset07h): 01234567890123456789 UUID String (Type1, Offset08h): xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx Asset Tag (Type3, Offset04h): Acet Asstag...

  • Page 48: Using The Lan Mac Eeprom Utility

    Using the LAN MAC EEPROM Utility You can use the MAC.BAT utility to write the MAC.CFG file to the EEPROM under DOS mode. Use a text editor (for example: Notepad) to open the MAC.CFG file. You can see the MAC.CFG contents as below: WriteData = ‘001122334455' MAC value...

  • Page 49: Machine Disassembly And Replacement

    Chapter 3 Machine Disassembly and Replacement IMPORTANT: The outside housing and color may vary from the mass produced model. This chapter contains step-by-step procedures on how to disassemble the notebook computer for maintenance and troubleshooting. Disassembly Requirements To disassemble the computer, you need the following tools: Wrist grounding strap and conductive mat for preventing electrostatic discharge •...

  • Page 50: Pre-Disassembly Instructions

    Pre-disassembly Instructions Before proceeding with the disassembly procedure, make sure that you do the following: 1. Turn off the power to the system and all peripherals. 2. Unplug the AC adapter and all power and signal cables from the system. 3.

  • Page 51: External Module Disassembly Process

    External Module Disassembly Process IMPORTANT: The outside housing and color may vary from the mass produced model. External Modules Disassembly Flowchart The flowchart below gives you a graphic representation of the external module disassembly sequence and instructs you on the components that need to be removed during servicing. For example, if you want to remove the keyboard, you must first remove the switch board.

  • Page 52: Removing The Battery Pack

    Removing the Battery Pack 1. Turn computer over. Slide the battery lock in the direction shown. 2. Slide and hold the battery release latch to the release position (1), then lift out the battery pack from the main unit (2). Chapter 3...

  • Page 53: Removing The Sd Dummy Card

    Removing the SD Dummy Card 1. Push the SD dummy card all the way in to eject it. 2. Pull it out from the slot. Chapter 3...

  • Page 54: Removing The Lower Covers

    Removing the Lower Covers 1. See “Removing the Battery Pack” on page 42. 2. Remove the three screws securing the Memory and HDD Covers. Memory Cover Cover Step Size Quantity Screw Type Lower Covers M2.5*8 3. Remove the HDD cover as shown. 4.

  • Page 55: Removing The Optical Drive Module

    Removing the Optical Drive Module 1. See “Removing the Battery Pack” on page 42. 2. Remove the screw securing the ODD module. Step Size Quantity Screw Type ODD Module M2.5*8 3. Insert a suitable tool into the access slot in the battery bay as shown. Gently lever the ODD module out of the chassis.
  • Page 56 5. Remove the two screws securing the ODD bracket and remove the ODD bracket from the optical disk drive module. Step Size Quantity Screw Type ODD Bracket M2*3 6. Remove the ODD bezel by rotating the top edge downward and pulling it clear of the module. Chapter 3...

  • Page 57: Removing The Dimm Modules

    Removing the DIMM Modules 1. See “Removing the Lower Covers” on page 44. 2. Push out the release latches on both sides of the DIMM socket to release the DIMM module. 3. Remove the DIMM module. 4. Repeat steps for the second DIMM module if present. Chapter 3...

  • Page 58: Removing The Wlan Module

    Removing the WLAN Module 1. See “Removing the Lower Covers” on page 44. 2. Remove the adhesive tape securing the Antenna cables in place. 3. Disconnect the antenna cables from the WLAN Board. NOTE: Cable placement is Black to the MAIN terminal (upper) and White to the AUX terminal (lower). Chapter 3...
  • Page 59 4. Move the antenna away and remove the two screws to release the WLAN Board. Step Size Quantity Screw Type WLAN Module M2*3 5. Detach the WLAN Board from the WLAN socket. NOTE: When reattaching the antennas, ensure the cables are tucked into the chassis to prevent damage. Chapter 3...

  • Page 60: Removing The Hard Disk Drive Module

    Removing the Hard Disk Drive Module 1. See “Removing the Lower Covers” on page 44. 2. Using the pull-tab, slide the HDD Module in the direction of the arrow to disconnect the interface. 3. Lift the HDD Module clear of the HDD bay. NOTE: To prevent damage to device, avoid pressing down on it or placing heavy objects on top of it.
  • Page 61 4. Remove the four screws (two each side) securing the hard disk to the carrier. Step Size Quantity Screw Type HDD Carrier M3*3 5. Remove the HDD from the carrier. Chapter 3...

  • Page 62: Main Unit Disassembly Process

    Main Unit Disassembly Process Main Unit Disassembly Flowchart Remove External Remove Remove Modules before Switch Cover Keyboard proceeding Remove LCD Module Remove Upper Cover Upper Lower Cover Cover Remove Remove Remove Remove Left Speaker Right Speaker TouchPad Power Board Module Module Bracket Remove...

  • Page 63: Removing The Switch Cover

    Removing the Switch Cover CAUTION: Using metal tools to remove the Switch Cover may cause damage to the outer casing. The use of plastic tools or fingers is recommended to remove the Switch Cover. 1. See “Removing the Battery Pack” on page 42. 2.

  • Page 64: Removing The Keyboard

    Removing the Keyboard 1. See “Removing the Switch Cover” on page 53. 2. Pry up the centre of the Keyboard and rotate it upward away from the Upper Cover. 3. Turn the keyboard over on to the TouchPad area to expose the FFC connector. 4.

  • Page 65: Removing The Lcd Module

    Removing the LCD Module 1. See “Removing the Keyboard” on page 54. 2. Turn the computer over. Remove the two securing screws from the bottom of the chassis. Step Size Quantity Screw Type LCD Module M2.5*8 3. Remove the Antenna Cables from the cable channel as shown. Ensure that the cables are free from all cable clips.
  • Page 66 4. Stand the computer on the LCD Panel and pull the Antenna cables completely through the chassis. 5. Disconnect the LCD cable from the Mainboard and remove the cable from the cable channel. 6. Remove the white Antenna cable from the cable channel. Ensure that the cable is completely free of the retaining clips all the way to the hinge well.
  • Page 67 7. Remove the adhesive tape securing the Antenna cable to the Upper Cover. 8. Remove the black Antenna cable from the cable channel as shown. Ensure that the cable is completely free of the retaining clips all the way to the hinge well. 9.
  • Page 68 12. Remove the four securing screws (two each side) from the LCD module. Step Size Quantity Screw Type LCD Module M2.5*8 13. Remove the left and right screw covers from on top of the hinges 14. Lift the LCD Module clear of the Upper Cover. Chapter 3...

  • Page 69: Removing The Upper Cover

    Removing the Upper Cover 1. See “Removing the LCD Module” on page 55. 2. Turn the computer over. Remove the eleven screws on the bottom panel. Step Size Quantity Screw Type Upper Cover M2.5*8 3. Turn the computer over. Remove the three screw caps at the rear of the Upper Cover as shown. Chapter 3...
  • Page 70 4. Disconnect the following four cables from the Mainboard. Chapter 3...
  • Page 71 5. Disconnect A as shown. 6. Disconnect C as shown. 7. Release the locking latch on B and remove the FFC cable as shown. 8. Release the locking latch on D and remove the FFC cable as shown. NOTE: Avoid pulling on cables directly to prevent damage to the connectors. NOTE: Use the pull-tabs on FFCs whenever available to prevent damage.
  • Page 72 9. Remove the nine screws on the top panel. Step Size Quantity Screw Type Upper Cover M2.5*8 10. Starting at the rear left side of the cover, pry apart the Upper and Lower Covers as shown. Work along the back edge of the casing to the right as shown, then lift the Upper Cover clear of the Lower Cover.

  • Page 73: Removing The Power Board

    Removing the Power Board 1. See “Removing the Upper Cover” on page 59. 2. Locate the Power Board on the Upper Cover as shown. 3. Remove the two screws securing the Power Board to the Upper Cover. Step Size Quantity Screw Type Power Board M2*3...

  • Page 74: Removing The Left Speaker Module

    Removing the Left Speaker Module 1. See “Removing the Upper Cover” on page 59. 2. Locate the Left Speaker Module on the Upper Cover as shown. 3. Remove the adhesive tape from the Speaker cable. 4. Remove the Speaker cable from the cable channel. Ensure that the cable is free from all cable clips. Chapter 3...
  • Page 75 5. Remove the single securing screw from the Left Speaker Module. Step Size Quantity Screw Type Left Speaker M2*3 Module 6. Lift the Speaker clear of the Upper Cover, left side first as shown. Chapter 3...

  • Page 76: Removing The Right Speaker Module

    Removing the Right Speaker Module 1. See “Removing the Upper Cover” on page 59. 2. Locate the Right Speaker Module on the Upper Cover as shown. 3. Turn the Upper Cover over and remove the Right Speaker Module cable from the cable channel. Ensure that the cable is free from all cable clips.
  • Page 77 5. Remove the single securing screw from the Right Speaker Module. Step Size Quantity Screw Type Right Speaker M2*3 Module 6. Lift the Speaker clear of the Upper Cover, right side first as shown. Chapter 3...

  • Page 78: Removing The Touchpad Bracket

    Removing the TouchPad Bracket IMPORTANT: The TouchPad Board cannot be removed individually. To replace the TouchPad Board, replace the entire Upper Cover. 1. See “Removing the Upper Cover” on page 59. 2. Lift the FFC to detach the adhesive securing the cable to the Upper Cover. 3.
  • Page 79 4. Remove the two screws from TouchPad bracket. Step Size Quantity Screw Type TouchPad Bracket M2*3 5. Lift the rear edge of the TouchPad bracket first to clear the securing clips and remove it as shown. Chapter 3...

  • Page 80: Removing The Mainboard

    Removing the Mainboard 1. See “Removing the Upper Cover” on page 59. 2. Remove the single securing screw from the Mainboard. Step Size Quantity Screw Type Mainboard M2.5*4 3. Lift the mainboard from the chassis, right edge first, and place it on a clean, dust-free surface. Chapter 3...

  • Page 81: Removing The Rtc Battery

    Removing the RTC Battery IMPORTANT:Follow local regulations for disposal of all batteries. The RTC Battery is soldered to the Mainboard. To replace the battery, solder the new battery to the connections shown. Chapter 3...

  • Page 82: Removing The Thermal Module

    Removing the Thermal Module 1. See “Removing the Lower Covers” on page 44. 2. Turn the Mainboard over to access the Thermal Module. 3. Remove the four securing screws (in reverse numerical order from screw 4 to screw 1) from the Thermal Module.
  • Page 83 4. Using both hands, lift the Thermal Module clear of the Mainboard. Chapter 3...

  • Page 84: Removing The Cpu Fan

    Removing the CPU Fan 1. See “Removing the Thermal Module” on page 72. 2. Disconnect the Fan cable from the Mainboard as shown. 3. Remove the three securing screws from the Fan Module. Step Size Quantity Screw Type CPU Fan M2*3 Chapter 3...
  • Page 85 4. Lift the CPU Fan clear of the Mainboard as shown. Chapter 3...

  • Page 86: Removing The Cpu

    Removing the CPU IMPORTANT: The pins on the underside of the CPU are very delicate. If they are damaged, the CPU may malfunction. Place the CPU on a clean, dry surface when it is not installed. 1. See “Removing the Thermal Module” on page 72. 2.

  • Page 87: Lcd Module Disassembly Process

    LCD Module Disassembly Process LCD Module Disassembly Flowchart Remove LCD Panel from Main Unit before proceeding Remove LCD Bezel Remove Remove LCD Panel Camera Module Remove Remove Remove LCD Brackets LCD FPC Cable Antennas Screw List Step Screw Quantity Part No. LCD Bezel M2.5*6 86.N2802.002...

  • Page 88: Removing The Lcd Bezel

    Removing the LCD Bezel 1. See “Removing the LCD Module” on page 55. 2. Remove the two upper and two lower bezel screw caps and screws. Step Size Quantity Screw Type LCD Bezel M2.5*6 3. Starting from the bottom edge of the bezel, pry the bezel upwards and away from the panel. Work along the right side toward the top of the bezel, prying the covers apart.

  • Page 89: Removing The Camera Module

    Removing the Camera Module 1. See “Removing the LCD Bezel” on page 78. 2. Locate the Camera Module at the top of the LCD Module and disconnect the camera cable. 3. Remove the Camera from the module. Chapter 3...

  • Page 90: Removing The Lcd Panel

    Removing the LCD Panel 1. See “Removing the Camera Module” on page 79. 2. Remove the two securing screws from the LCD Panel. Step Size Quantity Screw Type LCD Panel M2.5*6 3. Remove the adhesive strip holding the cables in place. 4.
  • Page 91 5. Lift the LCD Panel clear of the module. Chapter 3...

  • Page 92: Removing The Lcd Brackets And Fpc Cable

    Removing the LCD Brackets and FPC Cable 1. See “Removing the LCD Panel” on page 80. 2. Remove the six securing screws (three on each side) from the LCD Panel brackets. Step Size Quantity Screw Type LCD Brackets M2*3 3. Remove the LCD brackets by pulling away from the LCD Panel. Chapter 3...
  • Page 93 4. Turn the LCD panel over to expose the rear. Lift the adhesive protector and disconnect the cable from the LCD Panel. 5. Lift the cable as shown to disengage the adhesive strip securing it in place. 6. Lift the FPC cable to disengage the remaining adhesive and remove the cable from the panel. Chapter 3...

  • Page 94: Removing The Antennas

    Removing the Antennas 1. See “Removing the LCD Panel” on page 80. 2. Remove the adhesive strips holding the left antenna cable in place. Ensure the cable is free from obstructions. 3. Remove the cable from the cable channel. Ensure that the cable is free from all cable clips and adhesive strips. 4.
  • Page 95 5. Lift the left Antenna clear of the cover. 6. Remove the adhesive strips holding the right antenna cable in place. Ensure the cable is free from obstructions. 7. Remove the cable from the cable channel. Ensure that the cable is free from all cable clips and adhesive strips. Chapter 3...
  • Page 96 8. Remove the adhesive tape securing the right Antenna to the LCD Module. 9. Lift the right Antenna clear of the cover. Chapter 3...

  • Page 97: Lcd Module Reassembly Procedure

    LCD Module Reassembly Procedure Replacing the Antennas 1. Replace the right Antenna as shown. Ensure that the locating pins on the Antenna are correctly seated. Locating Pin Locating Pin 2. Replace the adhesive strip to secure the Antenna 3. Run the cable down the side of the LCD Module in place.
  • Page 98 5. Replace the left Antenna as shown. Ensure that the locating pins on the Antenna are correctly seated. Locating Pin Locating Pin 6. Replace the adhesive strip to secure the Antenna 7. Run the cable down the side of the LCD Module in place.
  • Page 99 9. The Antennas and cables appear as shown when correctly installed. Chapter 3...

  • Page 100: Replacing The Lcd Panel

    Replacing the LCD Panel 1. Connect the LCD cable to the panel connector as 2. Press down the adhesive strip to secure the cable shown. in place. 3. Run the cable along the back of the panel and 4. Run the cable across the back of the panel as press down as indicated to secure the cable in shown and press down as indicated to secure the place.
  • Page 101 5. Align the LCD brackets with the screw holes on the panel. Replace the six screws (three on each side) in the brackets as shown. 6. Place the LCD Panel in the LCD Module, top edge first, and secure the LCD cable with adhesive tape. IMPORTANT: Ensure that the LCD power cable passes through the hinge well and is not trapped under the panel.

  • Page 102: Replacing The Camera Module

    7. Replace the Camera cable cluster in the LCD 8. Secure the LCD module with the two securing Module. screws. Replacing the Camera Module 1. Place the camera in the LCD Module. 2. Connect the cable to the camera module. Chapter 3...

  • Page 103: Replacing The Lcd Bezel

    Replacing the LCD Bezel 1. Replace the bezel and press down until there are no gaps between the bezel and the LCD Module. IMPORTANT: Ensure that the LCD cables pass through the hinge wells and are not trapped by the bezel. Chapter 3...
  • Page 104 2. Replace the four screws and screw caps provided. Chapter 3...

  • Page 105: Main Module Reassembly Procedure

    Main Module Reassembly Procedure Replacing the CPU IMPORTANT: The CPU has a Pin1 locator that must be positioned corresponding to the marker on the CPU socket. 1. Place the CPU into the CPU socket as shown, taking note of the Pin1 locator. Socket Pin1 Locator Pin1 Locator...

  • Page 106: Replacing The Cpu Fan

    Replacing the CPU Fan 1. Align the screw holes on the CPU Fan and 2. Replace the three screws to secure the Fan to the Mainboard and replace the Fan. Mainboard. 3. Connect the Fan power cable to the Mainboard connector. Replacing the Thermal Module IMPORTANT: Apply a suitable thermal grease and ensure all heat pads are in place before replacing the Thermal Module.

  • Page 107: Replacing The Mainboard

    3. Align the screw holes on the Thermal Module and 4. Replace the four securing screws (in numerical Mainboard then replace the module. Keep the order from screw 1 to screw 4) to secure the module as level as possible to spread the thermal Thermal Module in place.

  • Page 108: Replacing The Touchpad Bracket

    Replacing the TouchPad Bracket 1. Replace the TouchPad bracket top edge first to 2. Press the bracket down to engage the securing engage the securing clips. clips. 3. Replace the two screws to secure the TouchPad Bracket to the Upper Cover. 4.
  • Page 109 5. Replace the FFC and press down as indicated to secure it to the Upper Cover. Chapter 3...

  • Page 110: Replacing The Right Speaker Module

    Replacing the Right Speaker Module 1. Place the module left side first on the Upper Cover 2. Replace the single screw to secure the module in as shown. Ensure that the left side of the module is place. seated correctly in the securing clip. 3.

  • Page 111: Replacing The Left Speaker Module

    Replacing the Left Speaker Module 1. Place the module right side first on the Upper 2. Replace the single screw to secure the module in Cover as shown. Ensure that the right side of the place. module is seated correctly in the securing clip. 3.

  • Page 112: Replacing The Power Board

    Replacing the Power Board 1. Slide the Power Board in to the Upper Cover front edge first to engage the securing clip. 2. Press the board down to locate the securing pin. 3. Replace the two screws to secure the board to the Upper Cover.
  • Page 113 2. Press down around the edges to secure it in place. 3. Replace the nine screws in the Upper Cover as shown. Chapter 3...
  • Page 114 4. Replace the three screw caps as shown. 5. Connect the following cables to the Mainboard. Chapter 3...
  • Page 115 6. Connect A as shown. 7. Connect C as shown. 8. Connect B and close the locking latch to secure the cable in place. 9. Connect D and close the locking latch to secure the cable in place. Chapter 3...

  • Page 116: Replacing The Lcd Module

    10. Turn the computer over and replace the eleven screws as shown. Replacing the LCD Module 1. Align the screw holes on the LCD Module and 2. The left and right screw covers are shaped Upper Cover and replace the LCD Module. differently.
  • Page 117 4. Replace the right screw cover as shown. Ensure that the securing tab on the rear of the cover is seated correctly in the Upper Cover. 5. Replace the four screws securing the LCD Module to the Upper Cover. 6. Ensure that the Hinge Covers are replaced 7.
  • Page 118 9. Run the black Antenna cable along the cable 10. Replace the adhesive strip to secure the cable in channel as shown using all available retaining place. clips. 11. Run the white Antenna cable along the cable channel as shown using all available retaining clips. 12.
  • Page 119 14. Stand the computer on the LCD Panel and pass the Antenna cables through the chassis. 15. The Upper Cover appears as shown when the Antenna and LCD cables are correctly installed. 16. Turn the computer over. Run the Antenna cables along the cable channel as shown, using all available cable clips.
  • Page 120 17. Replace the two screws securing the LCD Module to the Lower Cover. Chapter 3...

  • Page 121: Replacing The Keyboard

    Replacing the Keyboard 1. Connect the Keyboard FFC to the Mainboard and close the locking latch to secure the cable in place. 2. Turn the Keyboard over and insert it front edge first 3. Press down as indicated to secure the Keyboard in into the chassis.

  • Page 122: Replacing The Switch Cover

    Replacing the Switch Cover 1. Place the Switch Cover left side first on to the Upper Cover. 2. Press down as indicated to snap the Switch Cover into place. Replacing the Hard Disk Drive Module 1. Place the HDD in the HDD carrier. 2.
  • Page 123 3. Insert the HDD, as indicated and lower it into 4. Slide the HDD in the direction of the arrow to place. connect the interface. Chapter 3...

  • Page 124: Replacing The Wlan Module

    Replacing the WLAN Module 1. Insert the WLAN Module into the WLAN socket. 2. Replace the two screws to secure the module. 3. Connect the two Antenna cables to the module. 4. After connecting the cables to the terminals, secure the cables in place with adhesive tape to NOTE: The black cable connects to the upper avoid trapping.

  • Page 125: Replacing The Odd Module

    Replacing the ODD Module 1. Press the bezel into the tray, bottom edge first, to 2. Secure the ODD bracket with the two screws. secure it to the ODD Module. 3. Push the ODD Module into the ODD bay until it is 4.

  • Page 126: Replacing The Sd Dummy Card

    3. Replace the three screws to secure the covers in place. Memory Cover Cover Replacing the SD Dummy Card 1. Insert the SD Dummy Card into the slot as shown. 2. Push until the card clicks into place and is flush with the casing.

  • Page 127: Replacing The Battery

    Replacing the Battery 1. Slide and hold the battery release latch to the 2. Slide the battery lock in the direction shown to release position (1), insert the battery pack and secure the battery in place. press down (2). Chapter 3...
  • Page 128 Chapter 3...

  • Page 129: Troubleshooting

    Common Problems Use the following procedure as a guide for computer problems. NOTE: The diagnostic tests are intended to test only Acer products. Non-Acer products, prototype cards, or modified options can give false errors and invalid system responses. Obtain the failing symptoms in as much detail as possible.

  • Page 130: Power On Issue

    Power On Issue If the system doesn’t power on, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Computer Shutsdown Intermittently If the system powers off at intervals, perform the following actions one at a time to correct the problem. Check the power cable is properly connected to the computer and the electrical outlet.

  • Page 131: No Display Issue

    No Display Issue If the Display doesn’t work, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: No POST or Video If the POST or video doesn’t display, perform the following actions one at a time to correct the problem. Make sure that the internal display is selected.

  • Page 132: Random Loss Of Bios Settings

    Abnormal Video Display If video displays abnormally, perform the following actions one at a time to correct the problem. Reboot the computer. If permanent vertical/horizontal lines or dark spots display in the same location, the LCD is faulty and should be replaced. See “Disassembly Process” on page 40. If extensive pixel damage is present (different colored spots in the same locations on the screen), the LCD is faulty and should be replaced.

  • Page 133: Lcd Failure

    LCD Failure If the LCD fails, perform the following actions one at a time to correct the problem. Do not replace a non- defective FRUs: Built-In Keyboard Failure If the built-in Keyboard fails, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Chapter 4...

  • Page 134: Touchpad Failure

    TouchPad Failure If the TouchPad doesn’t work, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Internal Speaker Failure If the internal Speakers fail, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Chapter 4...

  • Page 135: Sound Problems

    Sound Problems If sound problems are experienced, perform the following actions one at a time to correct the problem. Reboot the computer. Navigate to Start Control Panel System and Maintenance System Device Manager. Check the Device Manager to determine that: •...

  • Page 136: Hdd Not Operating Correctly

    HDD Not Operating Correctly If the HDD does not operate correctly, perform the following actions one at a time to correct the problem. Disconnect all external devices. Run a complete virus scan using up-to-date software to ensure the computer is virus free. Run the Windows 7 Startup Repair Utility: insert the Windows 7 Operating System DVD in the ODD and restart the computer.

  • Page 137: Odd Failure

    ODD Failure If the ODD fails, perform the following actions one at a time to correct the problem. Do not replace a non- defective FRUs: ODD Not Operating Correctly If the ODD exhibits any of the following symptoms it may be faulty: •...
  • Page 138 Double-click lDE ATA/ATAPI controllers. If a device displays a down arrow, right-click on the device and click Enable. Double-click DVD/CD-ROM drives. If the device displays a down arrow, right-click on the device and click Enable. Check that there are no yellow exclamation marks against the items in lDE ATA/ATAPI controllers. If a device has an exclamation mark, right-click on the device and uninstall and reinstall the driver.
  • Page 139 Double-click IDE ATA/ATAPI controllers, then right-click ATA Device 0. Click Properties and select the Advanced Settings tab. Ensure that the Enable DMA box is checked and click OK. Repeat for the other ATA Devices shown if applicable. Drive Not Detected If Windows cannot detect the drive, perform the following actions one at a time to correct the problem.

  • Page 140: Wireless Function Failure

    Wireless Function Failure If the WLAN fails, perform the following actions one at a time to correct the problem. Do not replace a non- defective FRUs: Thermal Unit Failure If the Thermal Unit fails, perform the following actions one at a time to correct the problem. Do not replace a non-defective FRUs: Chapter 4...

  • Page 141: External Mouse Failure

    External Mouse Failure If an external Mouse fails, perform the following actions one at a time to correct the problem. Try an alternative mouse. If the mouse uses a wireless connection, insert new batteries and confirm there is a good connection. See the mouse user manual.

  • Page 142: Intermittent Problems

    Issue” on page 120.): Power-off the computer. Visually check them for damage. If any problems are found, replace the FRU. Remove or disconnect all of the following devices: • Non-Acer devices • Printer, mouse, and other external devices • Battery •...

  • Page 143: Post Codes

    Post Codes These tables describe the POST codes and descriptions during the POST. Sec: NO_EVICTION_MODE_DEBUG EQU 1 (CommonPlatform\sec\Ia32\SecCore.inc) Code Description 0xC2 MTRR setup 0xC3 Enab le cache 0xC4 Est ablish cache tags 0xC5 Enter NEM, Place the BSP in No Fill mode, set CR0.CD = 1, CR0.NW = 0. 0xCF Cach e Init Finished Memory:...
  • Page 144 Memory: DEBUG_BIOS equ 1 (Chipset\Alviso\MemoryInitAsm\IA32\IMEMORY.INC) Code Description 0x29 Perform JEDEC memory initialization for all memory rows 0x30 Perform steps required after memory init 0x31 Prog ram DRAM throttling and throttling event registers 0x32 Setup DRAM control register for normal operation and enable 0x33 Enable RCOMP 0x34...
  • Page 145 Each PEIM entry point used in 80_PORT Code Description 0x00 0x01 PEI_EVENT_LOG 0xA1 PEI_OEM _SERVICE 0xA2 PEI_SIO_INIT 0xA3 PEI_MONO_ST ATUS_CODE 0xA4 PEI_CPU_IO_PCI_CFG 0x06 PEI_CPU_ 0x07 PEI_PCI_CF 0xA5 PEI_CPU_PE 0xA6 PEI_PLA TFORM_STAGE1 0xA7 PEI_V ARIABLE 0xA8 PEI_SB_INIT 0x0C PEI_CAPSULE 0xAA PEI_PLA TFORM_STAGE2 0xAC PEI_SB_SMBUS_ARP_DISABLED 0x0F PEI_HOST_T...
  • Page 146 Each Driver entry point used in 80_PORT Code Description 0xC1 RUN_ RIME 0xC2 MONOT ONIC_COUNTER 0xC3 W ATCH_DOG_TIMER 0xC4 SECURITY_STUB 0xC5 DXE_CPU_ 0xC6 CF9_RESET 0xC7 PC_R 0xC8 ST ATUS_CODE 0xC9 VARIABLE EMU_VARIABLE 0xD9 DXE_CHIPSET_INIT 0x45 DXE_ALER T_FORMAT 0xD6 PCI_HOST_BRIDGE 0xD7 PCI_EXPRESS 0xD5 DXE_SB_INIT 0xDA ID E_CONTROLLER...
  • Page 147 Each Driver entry point used in 80_PORT Code Description 0x8E LEGAC Y_REGION 0x8F LEGAC Y_INTERRUPT 0x70 BIOS_KEYBOARD 0x71 BIOS_VEDIO 0x72 MONITER _KEY 0x73 LEGAC Y_BIOS 0x75 LEGAC Y_BIOS_PLATFORM 0x76 PCI_PLA TFORM 0x6C ISA_FLOOPY 0x6D PS2_MOUSE 0x6E USB_BOT 0x6F USB_CBI0 0x74 USB_MOU 0xFA SETUP_ UTILITY 0x90 FW...
  • Page 148 Each Driver entry point used in 80_PORT Code Description 0x11 CHINESE 0xB0 JAP ANESE 0xB1 DXE_UNICODE_COLLACTION Each SmmDriver entry point used in 80_PORT Code Description 0xD4 SMM_ACCESS 0xDE SMM_ CONTROL 0xCC SMM _BASE 0xD2 SMM_ RUNTIME 0xDF SB_SMM_ DISPATCH 0xD0 SMM_ THUNK 0xCA SMM _ACPI_SW_CHILD...

  • Page 149: Jumper And Connector Locations

    Chapter 5 Jumper and Connector Locations Top View Item Description JLVDS1 LCD Connector JP14 Power/B Connector JSPK1 Speaker(Left) Connector JSPK2 Speaker(Right) Connector JKB1 Internal Keyboard Connector JTP1 Touch Pad Connector South Bridge Touch pad (Left) Button Touch pad (Right) Button Chapter 5...

  • Page 150: Bottom View

    Bottom View ITEM DESCRIPTION PJP1 AC-IN Connector JRJ1 RJ45 Connector JCRT1 CRT Connector JP12 Fan Connector JUSB1 USB Connector JUSB2 USB Connector JMIC1 MIC-In Jack JHP1 Head-Phone Jack JSATA2 HDD Connector North Bridge JCPU1 CPU Socket JREAD1 Card Reader Socket PJP2 Battery Connector JDIMM2...

  • Page 151: Power Board

    Power Board ITEM DESCRIPTION Lid Switch TP Lock Button ON/OFF Button Wireless Button LED1 ON/OFF LED LED3 Media LED LED4 Num LED LED5 Wireless LED LED6 Caps LED LED7 TP Lock LED Chapter 5...

  • Page 152: Clearing Password Check And Bios Recovery

    This section provides you with the standard operating procedures of clearing password and BIOS recovery for Acer Aspire 5241 Series. The machine provides one Hardware Open Gap on main board for clearing pass- word check, and one Hotkey for enabling BIOS Recovery.

  • Page 153: Bios Recovery By Crisis Disk

    BIOS Recovery by Crisis Disk BIOS Recovery Boot Block: BIOS Recovery Boot Block is a special block of BIOS. It is used to boot up the system with minimum BIOS initialization. Users can enable this feature to restore the BIOS firmware to a successful one once the previous BIOS flashing process failed.
  • Page 154 Chapter 5...

  • Page 155: Fru (Field Replaceable Unit) List

    Guide. For ACER AUTHORIZED SERVICE PROVIDERS, your Acer office may have a DIFFERENT part number code from those given in the FRU list of this printed Service Guide. You MUST use the local FRU list provided by your regional Acer office to order FRU parts for repair and service of customer machines.

  • Page 156: Acer Aspire 5241 Series Exploded Diagrams

    Acer Aspire 5241 Series Exploded Diagrams Main Assembly Chapter 6...
  • Page 157 Description Acer P/N Middle Cover 60.N2802.003 Assy Hinge Cap 42.N2802.001 Assy Upper Case 60.N2802.001 Assy Mainboard MB.N6502.001 Lower Case 60.N2802.002 Chapter 6...

  • Page 158: Base Assembly

    Base Assembly Description Acer P/N 23.N2802.001 Thermal Module 60.N6502.001 Mainboard MB.N6502.001 Chapter 6...

  • Page 159: Rear Assembly

    Rear Assembly Description Acer P/N RAM Door 42.N2802.004 HDD Door 42.N2802.005 Lower Case 60.N2802.002 Chapter 6...

  • Page 160: Acer Aspire 5241 Series Fru List

    Acer Aspire 5241 Series FRU List CATEGORY Description AcerPN Board POWER BOARD 55.N2802.001 WLAN CARD-XB63 NI.23600.007 WLAN CARD-BCM4312 NI.23600.029 Cable TP FFC 50.N2802.001 POWER CORD US 3 PIN 27.TAVV5.001 POWER CORD EU 3 PIN 27.TAVV5.002 POWER CORD AUS 3 PIN 27.TAVV5.003...
  • Page 161 CATEGORY Description AcerPN LOWER CASE 60.N2802.002 TP BRACKET 33.N2802.001 MIDDLE COVER ASSY 60.N2802.003 HINGE CAP ASSY 42.N2802.001 UP CAP R 42.N2802.002 UP CAP L 42.N2802.003 RAM DOOR ASSY 42.N2802.004 HDD DOOR ASSY 42.N2802.005 Chapter 6...
  • Page 162 CATEGORY Description AcerPN HDD SEAGATE 2.5" 5400rpm 160GB ST9160310AS KH.16001.034 Crockett SATA LF F/W:0303 HDD TOSHIBA 2.5" 5400rpm 160GB MK1655GSX Libra KH.16004.006 SATA LF F/W: FG011J HDD HGST 2.5" 5400rpm 160GB HTS543216L9A300 KH.16007.019 Falcon-B SATA LF F/W:C40C HDD WD 2.5" 5400rpm 160GB WD1600BEVT-22ZCTO KH.16008.022 ML160 SATA LF F/W:11.01A11 HDD SEAGATE 2.5"...
  • Page 163 CATEGORY Description AcerPN ODD BEZEL-SUPER MULTI 42.N2802.006 ODD BRACKET 33.N2802.003 Keyboard Keyboard EM-7T HM50/70 Internal 17 Standard 99KS KB.I1700.438 Black US International Keyboard EM-7T HM50/70 Internal 17 Standard 99KS KB.I1700.423 Black Greek Keyboard EM-7T HM50/70 Internal 17 Standard 99KS KB.I1700.414 Black Arabic Keyboard EM-7T HM50/70 Internal 17 Standard 99KS KB.I1700.430...
  • Page 164 CATEGORY Description AcerPN ASSY LCD MODULE 15.6 IN. WXGA GLARE W/ 6M.N2802.001 ANTENNA*2, CCD 0.3M LCD AUO 15.6" WXGA Glare B156XW01-V0 LF 220nit LK.15605.001 CCFL LCD AUO 15.6"W WXGA Glare B156XW01 V0 1A LK.15605.002 LF 220nit 8ms 500:1 CCFL LCD SAMSUNG 15.6"W WXGA Glare LK.15606.001 LTN156AT01-A01 LF 220nit 8ms 600:1 CCFL LCD LPL 15.6"...
  • Page 165 CATEGORY Description AcerPN ASSY LCD MODULE 15.6 IN. WXGA GLARE W/O CCD 6M.N3202.001 LCD AUO 15.6" WXGA Glare B156XW01-V0 LF 220nit LK.15605.001 CCFL LCD AUO 15.6"W WXGA Glare B156XW01 V0 1A LK.15605.002 LF 220nit 8ms 500:1 CCFL LCD SAMSUNG 15.6"W WXGA Glare LK.15606.001 LTN156AT01-A01 LF 220nit 8ms 600:1 CCFL LCD LPL 15.6"...
  • Page 166 CATEGORY Description AcerPN ASSY LCD MODULE 15.6 IN. WXGA GLARE W/ 6M.N3202.001 ANTENNA*2, W/O CCD LCD AUO 15.6" WXGA Glare B156XW01-V0 LF 220nit LK.15605.001 CCFL LCD AUO 15.6"W WXGA Glare B156XW01 V0 1A LK.15605.002 LF 220nit 8ms 500:1 CCFL LCD SAMSUNG 15.6"W WXGA Glare LK.15606.001 LTN156AT01-A01 LF 220nit 8ms 600:1 CCFL LCD LPL 15.6"...
  • Page 167 CATEGORY Description AcerPN ASSY LED MODULE 15.6 IN. WXGA GLARE W/ 6M.N5502.001 ANTENNA*3 W/O CCD LCD AUO 15.6" WXGA Glare B156XW01-V0 LF 220nit LK.15605.001 CCFL LCD AUO 15.6"W WXGA Glare B156XW01 V0 1A LK.15605.002 LF 220nit 8ms 500:1 CCFL LCD SAMSUNG 15.6"W WXGA Glare LK.15606.001 LTN156AT01-A01 LF 220nit 8ms 600:1 CCFL LCD LPL 15.6"...
  • Page 168 CATEGORY Description AcerPN Memory NANYA SO-DIMM DDRII 667 1GB KN.1GB03.026 NT1GT64UH8D0FN-3C LF 64*16 0.07um Memory MICRON SO-DIMM DDRII 667 1GB KN.1GB04.010 MT8HTF12864HDY-667G1 LF 64*16 0.065um Memory ELPIDA SO-DIMM DDRII 667 1GB KN.1GB09.008 EBE11UE6ACUA-6E-E LF 64*16 0.065um Memory SAMSUNG SO-DIMM DDRII 667 1GB KN.1GB0B.027 M470T2864EH3-CE6 LF 64*16 0.055um Memory HYNIX SO-DIMM DDRII 667 1GB...
  • Page 169 Chapter 6...

  • Page 170: Model Definition And Configuration

    Appendix A Model Definition and Configuration Aspire 5241 Country Acer Part No Description S2.PQP02.001 AS5241-102G16Mn W7HP64AWW1 MC UMA512Cbs_2 2*1G/160/6L2.2/5R/ CB_bgn_0.3D_HG_ES62 S2.PQQ02.001 AS5241-102G16Mn W7HP64AWW1 MC UMA512bs_2 2*1G/160/6L2.2/5R/ CB_bgn_HG_ES62 VRAM 1 Memory 1 Memory 2 HDD 1(GB) Chip SMPM100 SO1GBII6 SO1GBII6 N160GB5.4KS...
  • Page 171 Aspire 5541 Country Acer Part No Description Australia/New LX.PQC02.003 AS5541G-304G64Mn W7HP64ATAU1 MC Zealand M92XT512Cbs_2 2*2G/640/6L2.2/5R/ CB_bgn_0.3D_HG_ES61 Australia/New LX.PQC02.002 AS5541G-304G50Mn W7HP64ATAU1 MC Zealand M92XT512Cbs_2 2*2G/500_L/6L2.2/5R/ CB_bgn_0.3D_HG_ES61 Australia/New LX.PQC02.001 AS5541G-304G32Mn W7HP64ATAU1 MC Zealand M92XT512Cbs_2 2*2G/320/6L2.2/5R/ CB_bgn_0.3D_HG_ES61 S2.PQC02.002 AS5541G-504G32Mn W7HP64AWW1 MC M92XT512Cbs_2 2*2G/320/6L2.2/5R/ CB_bgn_0.3D_HG_ES62...
  • Page 172 Country Acer Part No Description Denmark LX.PQN02.020 AS5541-304G32Mn W7HP64ATDK2 MC UMACbs_2 2*2G/320/6L2.2/5R/CB_bgn_0.3D_HG_ENS1 Eastern LX.PQN02.019 AS5541-304G32Mn W7HP64ATEU5 MC UMACbs_2 Europe 2*2G/320/6L2.2/5R/CB_bgn_0.3D_HG_RO11 Eastern LX.PQN02.018 AS5541-304G32Mn W7HP64ATEU5 MC UMACbs_2 Europe 2*2G/320/6L2.2/5R/CB_bgn_0.3D_HG_PL71 LX.PQN02.017 AS5541-304G32Mn W7HP64ATGB1 MC UMACbs_2 2*2G/320/6L2.2/5R/CB_bgn_0.3D_HG_EN11 Latvia LX.PQN02.016 AS5541-304G32Mn W7HP64ATLV1 MC UMACbs_2 2*2G/320/6L2.2/5R/CB_bgn_0.3D_HG_RU22...
  • Page 173 VRAM 1 Memory 1 Memory 2 HDD 1(GB) Chip AAM300 M92S 512M- SO2GBII6 SO2GBII6 N500GB5.4KS DDR2(64*16*4) AAM300 M92S 512M- SO2GBII6 SO2GBII6 N320GB5.4KS DDR2(64*16*4) ATM500 M92S 512M- SO2GBII8 SO2GBII8 N320GB5.4KS DDR2(64*16*4) AAM300 M92S 512M- SO1GBII6 SO1GBII6 N160GB5.4KS DDR2(64*16*4) AAM300 M92S 512M- SO2GBII6 SO1GBII6 N250GB5.4KS...
  • Page 174 VRAM 1 Memory 1 Memory 2 HDD 1(GB) Chip AAM300 SO2GBII6 SO2GBII6 N320GB5.4KS AAM300 SO1GBII6 N160GB5.4KS AAM300 SO1GBII6 N160GB5.4KS Appendix A...

  • Page 175: Test Compatible Components

    Appendix B Test Compatible Components This computer’s compatibility is tested and verified by Acer’s internal testing department. All of its system ® functions are tested under Windows 7 with backwards compatibility to Windows XP. Refer to the following lists for components, adapter cards, and peripherals which have passed these tests.

  • Page 176: Microsoft® Windows® 7 Environment Test

    Microsoft Windows 7 Environment Test ® ® BRAND Type Description A cover Quanta Normal wi IMR Normal wi IMR Wistron Normal wi IMR Normal wi IMR Normal wi IMR Normal wi IMR Normal wi IMR Normal wi IMR Normal wi IMR Normal wi IMR Normal wi IMR Normal wi IMR...
  • Page 177 BRAND Type Description Audio Codec Realtek ALC272X Realtek Audio Codec ALC272X ALC272X Realtek Audio Codec ALC272X ALC272X Realtek Audio Codec ALC272X ALC272X Realtek Audio Codec ALC272X ALC272X Realtek Audio Codec ALC272X ALC272X Realtek Audio Codec ALC272X B cover Mirror Mirror Mirror Mirror Mirror...
  • Page 178 BRAND Type Description SANYO 6CELL2.2 Battery SANYO AS-2009A Li-Ion 3S2P SANYO 6 cell 4400mAh Main COMMON 2.2Ah(A) 6CELL2.2 Battery SANYO AS-2009A Li-Ion 3S2P SANYO 6 cell 4400mAh Main COMMON 2.2Ah(A) 6CELL2.2 Battery SANYO AS-2009A Li-Ion 3S2P SANYO 6 cell 4400mAh Main COMMON 2.2Ah(A) 6CELL2.2 Battery SANYO AS-2009A Li-Ion 3S2P SANYO 6 cell 4400mAh...
  • Page 179 BRAND Type Description SONY 6CELL2.2 Battery SONY AS-2009A Li-Ion 3S2P SONY 6 cel l 4400mAh Main COMMON 2.2Ah(G6F) 6CELL2.2 Battery SONY AS-2009A Li-Ion 3S2P SONY 6 cel l 4400mAh Main COMMON 2.2Ah(G6F) 6CELL2.2 Battery SONY AS-2009A Li-Ion 3S2P SONY 6 cel l 4400mAh Main COMMON 2.2Ah(G6F) 6CELL2.2 Battery SONY AS-2009A Li-Ion 3S2P SONY 6 cel l 4400mAh Main...
  • Page 180 BRAND Type Description AAM300 CPU AMD AthlonII M300 2.0G 1M 35W Caspian AAM300 CPU AMD AthlonII M300 2.0G 1M 35W Caspian AAM300 CPU AMD AthlonII M300 2.0G 1M 35W Caspian AAM320 CPU AMD AthlonII M320 2.1G 1M 35W Caspian AAM320 CPU AMD AthlonII M320 2.1G 1M 35W Caspian AAM320 CPU AMD AthlonII M320 2.1G 1M 35W Caspian...
  • Page 181 BRAND Type Description HGST N320GB5.4KS HDD HGST 2.5" 5400rpm 320GB HTS545032B9A300 Panther B SATA LF F/W:C60F Disk imbalance criteria = 0.014g-cm N320GB5.4KS HDD HGST 2.5" 5400rpm 320GB HTS545032B9A300 Panther B SATA LF F/W:C60F Disk imbalance criteria = 0.014g-cm N320GB5.4KS HDD HGST 2.5" 5400rpm 320GB HTS545032B9A300 Panther B SATA LF F/W:C60F Disk imbalance criteria = 0.014g-cm N500GB5.4KS HDD HGST 2.5"...
  • Page 182 BRAND Type Description SEAGATE N160GB5.4KS HDD SEAGATE 2.5" 5400rpm 160GB ST9160314AS Wyatt SATA LF F/W:0001SDM1 N160GB5.4KS HDD SEAGATE 2.5" 5400rpm 160GB ST9160314AS Wyatt SATA LF F/W:0001SDM1 N160GB5.4KS HDD SEAGATE 2.5" 5400rpm 160GB ST9160314AS Wyatt SATA LF F/W:0001SDM1 N160GB5.4KS HDD SEAGATE 2.5" 5400rpm 160GB ST9160314AS Wyatt SATA LF F/W:0001SDM1 N160GB5.4KS HDD SEAGATE 2.5"...
  • Page 183 BRAND Type Description TOSHIBA N160GB5.4KS HDD TOSHIBA 2.5" 5400rpm 160GB MK1655GSX Libra SATA LF F/W: FG011J N160GB5.4KS HDD TOSHIBA 2.5" 5400rpm 160GB MK1655GSX Libra SATA LF F/W: FG011J N160GB5.4KS HDD TOSHIBA 2.5" 5400rpm 160GB MK1655GSX Libra SATA LF F/W: FG011J N160GB5.4KS HDD TOSHIBA 2.5"...
  • Page 184 BRAND Type Description TOSHIBA N320GB5.4KS HDD TOSHIBA 2.5" 5400rpm 320GB Capricorn BS ,MK3265GSX SATA 8MB LF F/W:GJ001J N320GB5.4KS HDD TOSHIBA 2.5" 5400rpm 320GB Capricorn BS ,MK3265GSX SATA 8MB LF F/W:GJ001J N320GB5.4KS HDD TOSHIBA 2.5" 5400rpm 320GB Capricorn BS ,MK3265GSX SATA 8MB LF F/W:GJ001J N320GB5.4KS HDD TOSHIBA 2.5"...
  • Page 185 BRAND Type Description N160GB5.4KS HDD WD 2.5" 5400rpm 160GB WD1600BEVT-22A23T0 , WD, ML320S SATA 8MB LF F/W:01.01A01 N160GB5.4KS HDD WD 2.5" 5400rpm 160GB WD1600BEVT-22A23T0 , WD, ML320S SATA 8MB LF F/W:01.01A01 N160GB5.4KS HDD WD 2.5" 5400rpm 160GB WD1600BEVT-22A23T0 , WD, ML320S SATA 8MB LF F/W:01.01A01 N160GB5.4KS HDD WD 2.5"...
  • Page 186 N640GB5.4KS HDD WD 2.5" 5400rpm 640GB WD6400BEVT-22A0RT0, ML320 SATA 8MB LF F/W:01.01A01 Keyboard ACER EM-7Tv2 Keyboard ACER EM-7Tv2 HM51 Internal 17 Standard Black NONE EM-7Tv2 Keyboard ACER EM-7Tv2 HM51 Internal 17 Standard Black NONE EM-7Tv2 Keyboard ACER EM-7Tv2 HM51 Internal 17 Standard Black...
  • Page 187 BRAND Type Description Atheros AR8132L Atheros AR8132L AR8132L Atheros AR8132L AR8132L Atheros AR8132L AR8132L Atheros AR8132L AR8132L Atheros AR8132L AR8132L Atheros AR8132L N15.6WXGAG CCFL LCD AUO 15.6"W WXGA Glare B156XW01 V0 1A LF 220nit 8ms 500:1 N15.6WXGAG CCFL LCD AUO 15.6"W WXGA Glare B156XW01 V0 1A LF 220nit 8ms 500:1 N15.6WXGAG CCFL LCD AUO 15.6"W WXGA Glare B156XW01 V0 1A LF...
  • Page 188 BRAND Type Description N15.6WXGAG LCD AUO 15.6" WXGA Glare B156XW01-V0 LF 220nit 8ms N15.6WXGAG LCD AUO 15.6" WXGA Glare B156XW01-V0 LF 220nit 8ms N15.6WXGAG LCD AUO 15.6" WXGA Glare B156XW01-V0 LF 220nit 8ms NLED15.6WXGA LED LCD AUO 15.6"W WXGA Glare B156XW02 V0 LF 220nit 8ms 500:1 NLED15.6WXGA LED LCD AUO 15.6"W WXGA Glare B156XW02 V0 LF 220nit...
  • Page 189 BRAND Type Description N15.6WXGAG CCFL LCD LPL 15.6" WXGA Glare LP156WH1-TLA1 LF 220nit 8ms 400:1 N15.6WXGAG CCFL LCD LPL 15.6" WXGA Glare LP156WH1-TLA1 LF 220nit 8ms 400:1 N15.6WXGAG CCFL LCD LPL 15.6" WXGA Glare LP156WH1-TLA1 LF 220nit 8ms 400:1 N15.6WXGAG CCFL LCD LPL 15.6"...
  • Page 190 BRAND Type Description HYNIX SO1GBII6 Memory HYNIX SO-DIMM DDRII 667 1GB HMP112S6EFR6C-Y5 LF 64*16 0.055um SO1GBII6 Memory HYNIX SO-DIMM DDRII 667 1GB HMP112S6EFR6C-Y5 LF 64*16 0.055um SO1GBII6 Memory HYNIX SO-DIMM DDRII 667 1GB HMP112S6EFR6C-Y5 LF 64*16 0.055um SO1GBII6 Memory HYNIX SO-DIMM DDRII 667 1GB HMP112S6EFR6C-Y5 LF 64*16 0.055um SO1GBII6 Memory HYNIX SO-DIMM DDRII 667 1GB HMP112S6EFR6C-Y5...
  • Page 191 BRAND Type Description MICRON SO1GBII6 Memory MICRON SO-DIMM DDRII 667 1GB MT8HTF12864HDY- 667G1 LF 64*16 0.065um SO1GBII6 Memory MICRON SO-DIMM DDRII 667 1GB MT8HTF12864HDY- 667G1 LF 64*16 0.065um SO1GBII6 Memory MICRON SO-DIMM DDRII 667 1GB MT8HTF12864HDY- 667G1 LF 64*16 0.065um SO1GBII6 Memory MICRON SO-DIMM DDRII 667 1GB MT8HTF12864HDY- 667G1 LF 64*16 0.065um...
  • Page 192 BRAND Type Description SAMSUNG SO1GBII6 Memory SAMSUNG SO-DIMM DDRII 667 1GB M470T2864EH3- CE6 LF 64*16 0.055um SO1GBII6 Memory SAMSUNG SO-DIMM DDRII 667 1GB M470T2864EH3- CE6 LF 64*16 0.055um SO1GBII6 Memory SAMSUNG SO-DIMM DDRII 667 1GB M470T2864EH3- CE6 LF 64*16 0.055um SO1GBII6 Memory SAMSUNG SO-DIMM DDRII 667 1GB M470T2864EH3- CE6 LF 64*16 0.055um...
  • Page 193 BRAND Type Description HLDS NSM8XS ODD HLDS Super-Multi DRIVE 12.7mm Tray DL 8X GT30N LF W/ O bezel SATA (HF + Windows 7) NSM8XS ODD HLDS Super-Multi DRIVE 12.7mm Tray DL 8X GT30N LF W/ O bezel SATA (HF + Windows 7) NSM8XS ODD HLDS Super-Multi DRIVE 12.7mm Tray DL 8X GT30N LF W/ O bezel SATA (HF + Windows 7)
  • Page 194 BRAND Type Description SONY NSM8XS ODD SONY Super-Multi DRIVE 12.7mm Tray DL 8X AD-7585H LF W/O bezel SATA (HF + Windows 7) NSM8XS ODD SONY Super-Multi DRIVE 12.7mm Tray DL 8X AD-7585H LF W/O bezel SATA (HF + Windows 7) NSM8XS ODD SONY Super-Multi DRIVE 12.7mm Tray DL 8X AD-7585H LF W/O bezel SATA (HF + Windows 7)
  • Page 195 BRAND Type Description McAfee Antivirus application McAfee McAfee Antivirus application McAfee McAfee Antivirus application McAfee McAfee Antivirus application McAfee McAfee Antivirus application McAfee McAfee Antivirus application McAfee VGA Chip M92SXT AMD M92SXT 55nm 23mm*23mm S2 package M92SXT AMD M92SXT 55nm 23mm*23mm S2 package None UMA (AMD) UMA (AMD)
  • Page 196 BRAND Type Description Wireless LAN Foxconn 3rd WiFi 1x2 Foxconn Wireless LAN Atheros HB93 1x2 BGN (HM) 3rd WiFi 1x2 Foxconn Wireless LAN Atheros HB93 1x2 BGN (HM) 3rd WiFi 1x2 Foxconn Wireless LAN Atheros HB93 1x2 BGN (HM) 3rd WiFi 1x2 Foxconn Wireless LAN Atheros HB93 1x2 BGN (HM) 3rd WiFi 1x2 Foxconn Wireless LAN Atheros HB93 1x2 BGN (HM)

  • Page 197: Online Support Information

    This section describes online technical support services available to help you repair your Acer Systems. If you are a distributor, dealer, ASP or TPM, please refer your technical queries to your local Acer branch office. Acer Branch Offices and Regional Business Units may access our website. However some information sources will require a user i.d.
  • Page 198 Appendix C...
  • Page 199 Removing Replacing AFLASH Utility Display Antennas display Removing hotkeys Replacing EasyTouch Failure Battery Euro Replacing External Module Disassembly Battery Pack Flowchart Removing BIOS ROM type Features vendor Version Flash Utility BIOS Utility 23–31 FPC Cable Boot Removing Exit FRU (Field Replaceable Unit) List Navigating Onboard Device Configuration Save and Exit...
  • Page 200 Removing Optical Disk Drive Replacing Replacing LCD Brackets Optical Drive Module Removing Removing Replacing LCD Cable Replacing Panel LCD Failure Bottom LCD Module PC Card Removing Power Board Replacing Removing LCD Module Disassembly Replacing Flowchart Power On Failure LCD Module Reassembly Procedure LCD Panel Removing Right Speaker Module...
  • Page 201 TouchPad Failure Troubleshooting Built-in KB Failure EasyTouch Buttons HDTV Switch Internal Speakers LCD Failure No Display Other Failures Power On Thermal Unit TouchPad WLAN Undetermined Problems Upper Cover Removing Replacing utility BIOS 23–31 Windows 2000 Environment Test Wireless Function Failure WLAN Module Removing Replacing...

Table of Contents