Table of Contents
Advertisement
4.
In flash BIOS, the message Please do not remove AC Power Source displays.
C:\NDWG0\ndwg005a\ndwg005
C:\NDWG0\ndwg005a\flashit ndwg005.fd /b /fe /dc
C:\NDWG0\ndwg005a\
Plug in the AC power to continue.
5.
Flash is complete when the message Flash programming complete displays.
WinFlash Utility
Perform the following steps to use the WinFlash Utility:
1.
Double-click the WinFlash executable. Confirm your choice.
2.
Click OK to begin the update. WinFlash closes all applications and shuts down the system.
NOTE: Place only one *.wph file with flash32.exe in the same folder when executing this procedure.
Chapter 2
Please do not remove the AC power!
33
Advertisement
Table of Contents
