Table of Contents
Advertisement
The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
Parameter
System Time
System Date
System Memory
Extended Memory
Video Memory
Quiet Boot
Network Boot
F12 Boot Menu
D2D Recovery
SATA AHCI Enable
NOTE: The sub-items under each device will not be shown if the device control is set to disabled. This is
because the user is not allowed to control the settings in these cases.
Chapter 2
Description
Sets the system time. The hours are displayed with
24-hour format.
Sets the system date.
Displays the system memory size. Memory size is
fixed to 640KB
Displays the total size of the installed memory.
Displays the video memory size.
Determines if the Customer Logo and Summary
Screen will be displayed or not during boot up.
Enabled: Customer Logo is displayed, and
Summary Screen is disabled.
Disabled: Customer Logo is not displayed, and
Summary Screen is enabled.
Enables, disables system boot from LAN (remote
server).
Enables, disables the Boot Menu during POST.
Enables, disables the D2D Recovery function. This
function allows the user to create a hidden partition
on hard disc drive to store the operation system
and restore the system to factory defaults.
Selects the mode in which the SATA controller
operates.
Format/Option
Format: HH:MM:SS
(hour:minute:second) System Time
Format MM/DD/YYYY
(month/day/year) System Date
Enabled
Option:
or Disabled
Enabled
Option:
or Disabled
Disabled
Option:
or Enabled
Enabled
Option:
or Disabled
AHCI Mode
Option:
or IDE Mode
43
Hide quick links:
Advertisement
Table of Contents
