Operating The Washer - Kenmore 4044 - 4.2 cu. Ft. Front-Load Washer Use And Care Manual

OPERATING THE WASHER
O SORT LAUNDRY AND LOAD WASHER
Refer to page 15.
@
ADD DETERGENT AND OTHER PRODUCTS
Open the dispenser drawer and add _detergent to the main wash
compartment in the dispenser drawer. Add bleach and fabric softener as
desired. See pages 16 and 17 for important information on detergents and
dispenser use.
O TURN ON THE WASHER i_l
JJ
Press the POWER button to turn ON the washer. The lights around the Cycle I_iiii.
Selector Knob will illuminate and a chime will sound, if turned ON. Refer to
..... POWER
page 12. i_ill
O SELECT A CYCLE
Turn the Cycle Selector Knob either direction to select the desired cycle. The
preset Wash/Rinse Temperature, Spin Speed, Soil Level, and Option settings
for that cycle will be shown. Refer to page 12.
O SELECT CYCLE MODIFIERS
Default settings for the selected cycle can now be changed if desired. This
can be done using the cycle modifier buttons as shown on page 19
(Wash/Rinse, Spin Speed, Soil Level, and Chime).
NOTE: To protect your fabrics, not all modifiers are available on all cycles.
(
Add Steam
Clean Washer
0
SELECT CYCLE OPTIONS
Cycle options can also be added using the options buttons as shown on page
20 and 21 (Stain Treat, 2 nd Rinse, Control Lock, Add Steam, Clean Washer
and Delay Start).
NOTE: Not all options are available on all cycles.
START/PAUSE
O BEGIN CYCLE
Press the START/PAUSE button to begin the cycle. Once the cycle has been
started, pressing the START/PAUSE again will pause the washer and retain
the existing settings for up to 4 minutes.
13