Lexmark 20G0482 - T 644tn B/W Laser Printer Service Manual page 109

User attendance messages—paper jams and paper handling errors (2xx.xx)
Error Sub
Description
code codes
238 .00 Paper is covering one of
the duplex sensors
during a reset.
238 .01 Duplex input sensor
covered.
238 .02 Duplex exit sensor
covered.
238 .03 Duplex input and exit
sensors covered.
238 .04 Duplex doublefeed
sensor covered.
238 .05 Duplex doublefeed
sensor covered.
238 .06 Duplex doublefeed and
exit sensors covered.
Possible causes
• Media left in the duplex and
Continue selected.
• Sensor is having mechanical or
electrical problems.
• Media left in the duplex and
Continue selected.
• Sensor is having mechanical or
electrical problems.
• Media left in the duplex and
Continue selected.
• Sensor is having mechanical or
electrical problems.
• Media left in the duplex and
Continue selected.
• Sensor is having mechanical or
electrical problems.
• Media left in the duplex and
Continue selected.
• Sensor is having mechanical or
electrical problems.
• Media left in the duplex and
Continue selected.
• Sensor is having mechanical or
electrical problems.
• Media left in the duplex and
Continue selected.
• Sensor is having mechanical or
electrical problems.
4061-xx0
Action
• Remove any sheets from
the duplex option.
• Try the duplex option again.
If it fails, try another duplex
option, if available. If one is
not available, replace the
duplex option.
• Remove any sheets from
the duplex option.
• Try the duplex option again.
If it fails, try another duplex
option, if available. If one is
not available, replace the
duplex option.
• Remove any sheets from
the duplex option.
• Try the duplex option again.
If it fails, try another duplex
option, if available. If one is
not available, replace the
duplex option.
• Remove any sheets from
the duplex option.
• Try the duplex option again.
If it fails, try another duplex
option, if available. If one is
not available, replace the
duplex option.
• Remove any sheets from
the duplex option.
• Try the duplex option again.
If it fails, try another duplex
option, if available. If one is
not available, replace the
duplex option.
• Remove any sheets from
the duplex option.
• Try the duplex option again.
If it fails, try another duplex
option, if available. If one is
not available, replace the
duplex option.
• Remove any sheets from
the duplex option.
• Try the duplex option again.
If it fails, try another duplex
option, if available. If one is
not available, replace the
duplex option.
Diagnostic information
2-69