Kenmore 8757 - 6.7 cu. Ft. HE2 Electric Dryer Quick Start Manual

@
We have taken great care to give your new dryer the most convenient and easy-to-use features. Use this guide to help optimize the use of your dryer.
Cons@t the Use and Care Guide for more deta}bd instructbns. To contact the Sears Service Center, call IoSO0-4-MyoHOME _ (1o800-4694663).
STATUS AUTO
Power CYCLES
wet? @
Damp _) Casual
Cool Down
Normal
Clothes Dry _ ? More
Wrinkle Guard 0 ? Normal Jeans I
O Less
Controls Locked _ _
Heavy DuI
Check Lint Screen 4
Dryness
Level
_UTO CYC[SONY
Delicate
TIMED
CYCLES
Timed
Dry
Express
Dry
Touch Up
Cycle
Ad'ust
N,
MODIFIERS & OPTIONS
I , High
I _Medium High
_Medium
,Low
I , Extra Low
(_ Air Only
Temperature
Modeb/Modelos 110.8756", 8757*, 8758*, 9756*, 9757*, 9758*
Wrinkle Guard 90
Cycle Signal
Explosion Hazard
Keep flammabme materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
flammabme on it (even after washing).
Failure to follow these instructions can resumt in
death, explosion, or fire.
1. Clean the lint screen.
2. Place laundry in dryer.
3. Shut the door.
4. Press POWER.
5. Select Auto Cycle,
Turn cycle knob to recommended Auto Cycle for type
of load being dried.
Temperatures cannot be adiusted on auto cycles.
or select Timed Dry Cycle.
Turn cycle knob to Timed Dry.
Select drying time using More Time or Less Time buttons.
Select temperature setting using Temperature button.
6. Select OPTIONS.
To be alerted when cycle is complete, select the
End of Cycle Signal.
To help keep wrinkles from setting in after drying is
complete, select Wrinkle Guardt
7. Press and hold the START button.
W10035070
Fire Hazard
No washer can compmetely remove oil
Do not dry anything that has ever had any type of
oH on it (including cooking oilS)o
Items containing foam, rubber, or pmastic must be
dried on a clothesline or by using an Air Cycmeo
Failure to follow these instructions can resumt in
death or fire°
"x
This feature is a reminder to check to see whether the
lint screen needs to be cleaned. The Check Lint Screen
light will come on when the machine is turned on. The light
will flash until the cycle is started or the door is opened, and
then the light will turn off.
,,. .t'
A preset time is displayed when an automatic cycle is
selected. During the first few minutes of the drying
process, the cycle time may automatically vary from the
preset time based on the size and fabric type of the load.
Toward the end of the drying process, the estimated time
display will adiust again, showing the final drying time. For
timed dry cycles, this time will count down from the start of
the cycle.
,.. j
Continued on back