Table of Contents
Advertisement
The external display no
longer displays properly
When you want to display
the fonts or icons at a larger
size
Windows XP
An error occurs or the computer
freezes while using Dualview
Fast User Switching function
Some applications do not
work properly
Battery Indicator
The red indicator lights
The red indicator blinks
The orange indicator blinks
When an external display not compatible with the power saving mode is used with the
computer, the external display may no longer display properly when the computer enters
the condition the power of the display is OFF (for energy conservation purposes). In such
cases, turn off the power to the external display.
Change the settings as follows (for more details, refer to the Windows Help).
Windows 2000
1 Select [Start] - [Settings] - [Control Panel] - [Display] - [Appearance].
2 Select the scheme labeled "large" or "extra large" in [Scheme] to change the font size,
and select [Icon] in [Item] to change the icon size.
3 Select [OK].
You can change the size of the icons, etc. using "Icon Enlarger" (
Windows XP
1 Select [start] - [Control Panel] - [Appearance and Themes] - [Display] - [Appearance].
2 Select the font size in [Font size], and select [Effects] and then add the check mark for
[Use large icons] to increase the icon size.
3 Select [OK], then select [OK].
You can change the size of the icons, etc. using "Icon Enlarger" (
If you use a 3D screen saver while in Dualview mode at a high resolution, an error may
occur or the computer may freeze. Under these conditions, do not use a 3D screen saver.
Windows XP
When switching to a different user with the Fast User Switching function, the following
problems may occur. In this case, log off all users, and try the operation once more. If the
problem persists, restart the computer.
• Some applications may not work properly (for example, PDF files may not be printed
properly).
• It may not be possible to set the settings of the display.
• A serial mouse may not work.
• Fn + F3 may not work.
• The wireless LAN cannot be used.
• The B's CLiP icon will no longer be shown on the taskbar and a CD-RW disc cannot be
written on.
The battery level is very low (the charge is less than approx. 9% capacity).
Connect the AC adaptor. You can use the computer when the indicator light is orange. If you
do not have an AC adaptor, save your data and power off your computer. After replacing the
battery pack with a fully charged one, turn your computer on.
Quickly save your data and power off your computer. Remove the battery pack and discon-
nect the AC adaptor, then connect them again.
If the problem persists, contact Panasonic Technical Support. The battery pack or recharg-
ing function may be defective.
Battery cannot be recharged temporarily because the internal temperature of the battery
pack is outside of the acceptable temperature range for recharging. Once the allowable
range requirement is satisfied, charging begins automatically. Your computer can be used
normally.
page 13).
page 14).
25
Advertisement
Table of Contents
