Panasonic CF-29CRKGZKM - Toughbook 29 - Pentium M 1.2 GHz Service Manual page 56

7.2.19. Setting the HDD
1. Set the HDD FPC to HDD.
2. Attach the Heater to HDD.
3. Attach the Heater Sheet to the Heater.
4. Attach the two Sheets to HDD.
5. Attach the six HDD Forming MFYPC and the two HDD
Terminal Plate Upper to the HDD Damper Ass'y
6. Attach the six HDD Forming MFYPC and the two HDD
Terminal Plate Upper to the HDD Damper Ass'y.
7. Set the HDD Damper Ass'y to HDD.
8. Attach the Side Cushion to the HDD L Case Ass'y.
9. Set the HDD U Case Ass'y and the HDD L Case Ass'y,
and set the two Tabs of the HDD L Case Ass'y.
10. Fix the HDD U Case Ass'y and the HDD L Case Ass'y
using the four Screws<A>.
Screws <A>: DFHE5025XA
n Attaching the Sheet
Safety Working
View "C"
Sheet
HDD FPC
Heater
View "E"
Do not put the Cables between
Heater
the Heater and the HDD.
HDD Cables HDD FPC
View "D"
View "E"
HDD
Heater Sheet
Cables
Sheet
HDD FPC
HDD
Heater Sheet
Sheet
Sheet
Heater
HDD U Case Ass'y
View "A"
Sheet
View "B"
HDD
View "D"
Sheet
Heater
0~2mm
7-38
HDD U Case Ass'y
HDD Terminal
Plate Upper
HDD
Damper
Ass'y
HDD Forming
MFYPC
HDD Forming
HDD Forming
MFYPC
MFYPC
HDD Terminal
Plate Upper
Side Cushion
<A>
<A>
Tab
<A>
Tab
View "A"
Heater Sheet Heater
0~2mm
Sheet
View "B"
Sheet
HDD FPC
Heater
View "C"
Heater
Sheet
0~2mm
HDD FPC
Terminal
<A>
0~2mm