Panasonic CF-29CRKGZKM - Toughbook 29 - Pentium M 1.2 GHz Service Manual page 25

7.1.15. Removing the Palm Top Cover
Sheet, Palm Top Cover, Touch Pad
Adhesion Seat, Touch Pad, Touch
Pad SW Knob, LED PCB and SW
LED PCB
Palm Top Cover Sheet
<e>
<e>
<e>
<e>
<e>
Touch Pad Adhesion Seat
LED PCB
Touch Pad SW Knob
Touch Pad
SW Knob In
Figure 14
1. Remove the Palm Top Cover Sheet.
2. Remove the five Screws<e>, and remove Palm Top
Cover.
3. Remove the Touch Pad Adhesion Seat.
4. Remove the Touch Pad.
5. Remove the Touch Pad SW Knob and Touch Pad SW
Knob In.
6. Remove the LED PCB.
7. Remove the PW LED Sheet.
8. Remove the Screw<f>, and remove the SW LCD PCB.
Screws <e>: DRHM0002ZA
Screw <f>: DRHM0002ZA
Palm Top Cover
PW LED Sheet
Touch Pad
<f>
PW LED
PCB
SW LED
PCB
7.1.16. Removing the Handle and Power
SW
<g>
Handle Base L
Power
SW
Handle
1. Remove the two Screws<g>, and remove Handle Base
L,R.
2. Remove the Handle.
3. Remove the Power SW.
Screws <g>: DRSB4+8FKL
7-7
<g>
Handle Base R
Figure 15