Honeywell HCM-750 Series Important Safety Instructions Manual page 7

CLEANING: HCM-750 Series (continued)
Disinfecting directions: Disinfect following scale removal
STEP 1
DO NOT DISINFECT the
Wicking Filters.
STEP 4
Soak water hose, water
pump, water fill baffle,
fill funnel and protective
clear cover in water
reservoir of the main
housing if these parts
were not cleaned on the
top rack of dishwasher.
Note: Please be careful of clothing, rugs and other non bleach resistant materials when
disinfecting. Spilling bleach on clothing, rugs and certain surfaces may cause damage.
STEP 2
Set aside top grille,
protective clear cover,
filter tray, water pump,
water hose, water fill
baffle and fill funnel.
STEP 5
Soak for 15-20 minutes.
Wipe top grille and filter
tray with the water - bleach
solution if these parts were
not placed in dishwasher.
Thoroughly rinse main
housing and any parts not
placed in dishwasher until
the smell of bleach is gone.
STEP 3
Add 1 TB of bleach to 1
gallon water. Add 1 gallon
of water/bleach solution to
water reservoir of the main
housing. Using this mixture
wipe the walls of the main
housing.
NOTE: USING MORE
THAN 1 TB OF BLEACH
PER GALLON OF
WATER WILL RESULT
IN DAMAGE TO YOUR
HUMIDIFIER.
7