Voice Vlan; Voice Vlan Properties - NETGEAR FS728TPv2 Software Administration Manual

FS728TP Smart Switch Software Administration Manual

Voice VLAN

Configure the Voice VLAN settings for ports that carry traffic from IP phones. The Voice
VLAN feature can help ensure that the sound quality of an IP phone is safeguarded from
deteriorating when the data traffic on the port is high.
From the VLAN link, you can access the following pages:
•

Voice VLAN Properties

• Voice VLAN Port Setting
• Voice VLAN OUI
Voice VLAN Properties
To display the Voice VLAN Properties page, click Switching Voice VLAN  Basic 
Properties.
To configure Voice VLAN:
From the Voice VLAN Status field, enable or disable Voice VLAN on the switch. If the
1.
switch does not handle traffic from IP phones, the status should be disabled.
From the Voice VLAN ID field, select the VLAN to use for voice traffic on the switch. The
2.
VLAN must already exist on the switch. For information about how to create VLANs, see
VLAN Configuration
From the Class of Service field, set the CoS tag value to be reassigned for packets
3.
received on the Voice VLAN when Remark CoS is enabled.
From the Remark CoS field, select Enable or Disable to reassign the CoS tag value to
4.
packets received on the Voice VLAN.
From the Voice VLAN Aging Time field, specify the amount of time after the last IP phone's
5.
OUI is aged out for a specific port. The port will age out after the bridge and voice aging
time.
on page 87
on page 88
on page 89
on page 82.
Chapter 3: Configuring Switching Information | 87