User Instruction; Installing Drivers And Applications; Modifying / Uninstalling Drivers And Applications - Creative Digital Wireless Gaming Headset HS-1200 User Manual

user Instruction

Congratulations on selecting Creative HS-1200 Digital Wireless Gaming Headset from Creative
Labs. Creative HS-1200 Digital Wireless is the first fully bi-directional 2.4GHz USB Gaming
Headset with Sound Blaster
stereo audio with powerful 40mm Neodymium drivers and clear voice communication with
easy-access control buttons on the earcup, the HS-1200 Digital Wireless Gaming Headset with
X-Fi Technology creates immersive 3D surround sound effect that makes you feel like you are
actually in the game. Sound Blaster
gives you the competitive edge over conventional headsets.
package Contents
• Creative HS-1200 Digital Wireless Gaming Headset
• USB Transceiver
• User Guide
• Installation CD
X-Fi Crystalizer
X-Fi CMSS-3d

Installing drivers and applications

Insert the Sound Blaster
Right-click the CD-ROM/DVD-ROM drive icon, and then click open autoplay or Autoplay
Follow the instruction on the screen to complete the installation > restart your computer.

Modifying / uninstalling drivers and applications

Insert the Sound Blaster
Right-click the CD-ROM/DVD-ROM drive icon, and then click Open AutoPlay or AutoPlay.
Follow the instructions on-screen. At the Program Maintenance page, select Add or Remove to
modify, Repair to reinstall or Remove All to uninstall the software suite.
1. Volume + / -
Press "+" to increase or "–" to decrease headset volume.
2. LEd Indicator
Red indicates your headset is charging.
Blue indicates the headset is powered on and paired with USB Transceiver.
3. answer / End Call
Press once to receive an incoming call with Windows Live
MSN Messenger.
®
Press again to end call.
pause Music playback
Pauses audio in Windows Media
Other applications' behavior may vary.
4. power on / off
To turn your headset on or off headset, press and hold for 1-3 seconds.
pairing Mode
To activate pairing mode, turn off your headset. Simultaneously press and hold the
'power-on' button for more than 5 seconds on your headset and USB Transceiver.
When LED shows steady blue, your headset is now paired with the USB Transceiver.
5. dC-IN port
To charge your headset, connect the DC charging pin to your headset.
It takes approximately 2.5 hours to fully charge your headset. Please charge your headset
for minimum 6 hours if using it for the first time.
Note: Your HS-1200 headset is rechargeable even while in use.
6
X-Fi for full-out gaming. Delivering high-fidelity uncompressed
®
X-Fi Software makes your games sound way better and
®
Enhances musical dynamics by emphasizing sharp percussive
sounds and transients
X-Fi CMSS-3D Headphone: Provides a multichannel playback
experience over headphones for all types of content.
X-Fi installation CD into your CD/DVD-ROM drive.
®
X-Fi installation CD into your CD/DVD-ROM drive.
®
Player.
®
Messenger or
TM