Panasonic Viera TX-L32E5B Operating Instructions Manual page 68

[Acquire IP Address] / [Acquire DNS Address]
Sets [IP Address], [Subnet Mask], [Default Gateway], [Primary DNS] and [Secondary DNS].
Select [Acquire IP Address] / [Acquire DNS Address] and set to [Auto] (recommended).
IP/DNS Settings
Acquire IP Address Auto
IP Address
Subnet Mask
Default Gateway
Acquire DNS Address Auto
DNS Address
Proxy Settings
3
Select [Proxy Settings] and set the items
IP/DNS Settings
Acquire IP Address Auto
IP Address
Subnet Mask
Default Gateway
Acquire DNS Address Auto
DNS Address
Proxy Settings Access
[Proxy]
Sets Proxy address.
This is the address of the relay server that is connected to the target server instead of the browser and sends data to
the browser. Setting is required if specified by the provider.
1. Select [Proxy]
Proxy Settings
Proxy
Proxy Port 0
select
access
[Proxy Port]
Sets Proxy port number.
This number is also specified by the provider with the Proxy address.
1. Select [Proxy Port]
Proxy Settings
Proxy
Proxy Port 0
4
Select [Connection Test] and access to test
Connection Test Access
Connection Test
Check network cable connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection for VIERA Connect.
Wireless connection settings
This setting is for the wireless network connection.
Confirm the encryption key, settings and positions of your access point before starting setup. For details, read the
manual of the access point.
1
Select [Network Connection] and set to [Wireless]
Network Connection Wireless
68
The available settings are displayed automatically.
Manual settings ([IP Address], [Subnet Mask], [Default Gateway],
[Primary DNS], [Secondary DNS])
select
access / store
select
access
After settings, return to the previous menu.
2. Enter the address
Proxy
Host
select
set
You can set characters by using numeric
buttons.
2. Move the cursor and enter the number
select
access
Performs automatic testing of the network connection for the TV. (It takes a
while to test.)
: succeeded
The test is successful and the TV is connected to the network.
: failed
Check the settings and connections. And then select [Retry].
select
access / store
3. Store