Panasonic Viera TX-L32E5B Operating Instructions Manual page 49

: Overlapped timer programming events
Timer programming - Programmes according to the time setting
Timer Programming
Function No. Channel Name
Ext Rec.
D 72 BBC 2W
<TIMER>
Reminder D 14 E4
The Bill
Ext Rec.
D 1 BBC ONE
DIY SOS
Ext Rec.
D BBC ONE
<TIMER>
--- ---
1
Channel number
D : DVB / A : Analogue
D: DVB / A: Analogue
You cannot change the mode within the menu.
Guide : Guide link programming - Programmes according to the TV Guide signal (p. 25)
S/P : Split Programme programming (p. 25)
These functions are not available in Analogue mode.
Guide link programming is Timer Programming which is controlled by information from the TV Guide; if programme
start and end times are changed by the broadcaster, the timer programming event will follow the change.
A Split Programme programming is a Guide link programming which is interrupted by one or more other
programmes. Note that Guide link programming (including Split Programme programming) only works reliably if
correct information is received from broadcasters.
To edit a timer programming event
Select the event
To change a timer programming event
Correct as necessary (p. 48)
To delete a timer programming event
(red)
To unlock the tuner and stop recording
Note
Check that the LED is orange. If not, timer programming events are not active or not stored.
Timer Programming reminder messages will remain displayed until one of the following occurs:
You press the OK button to view the programme or the EXIT button to cancel the reminder.
•
The timer programming event that the reminder is set for ends.
•
"!" identifies that two or more timer programming events are overlapped. [Ext Rec.] is given priority over [Reminder].
As for the overlapped recording events, the first event starts and finishes as programmed. The next event can then
start.
The recording of Timer Programming will automatically change to the programmed channel a few seconds before the
start time.
To stop recording the timer programming event, it may be necessary to stop the recorder manually.
The recording of Timer Programming will be performed even if the TV is in [Pause Live TV] recording (p. 79). In this
case, [Pause Live TV] recording will be cancelled.
Wed 26 Oct 2011 10:46
Date Start End
Wed 26 Oct
20:00 21:30
(90 min.)
Wed 26 Oct 21:00 22:00
(60 min.)
Guide
Wed 26 Oct
22:45 23:00
(15 min.)
S/P
Thu 27 Oct
STTL 10:30 11:30
(60 min.)
--:-- --:-- --:--
4
Ending time
3
Starting time
Select the programme
Duration (automatic display)
Records with subtitles (if available)
To indicate this
(yellow) ( Press again to remove subtitles)
2
Date
one day ahead
daily or weekly (press repeatedly)
[Daily Sun-Sat]: Sunday to Saturday
[Daily Mon-Sat]: Monday to Saturday
[Daily Mon-Fri]: Monday to Friday
[Weekly Sat/Fri/Thu/Wed/Tue/Mon/Sun]:
Same time on the same day every week
To record with subtitles (if available)
Each time pressed:
•
(yellow)
auto
To cancel a timer programming event temporarily
Each time pressed:
•
(blue)
cancel
To view details of the programming (only for
Guide link programming)
Press again to return to
Timer Programming menu.
off
stop cancelling
49