JVC LT-32DM22 Instruction Manual page 34

Connections to other equipment
To connect an audio system
This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using the
TV's remote control.
To control the audio, turn on the TV and the stereo amplifier, and turn off the TV's built-in speakers
(see "Speakers" on page 18).
To VAR. (VARIABLE)
AUDIO (L/R) OUT
NOTE:
• To hear sound when using an external audio amplifier, the volume of both the TV and the amplifier must be set
above 0 (zero).
• For example, if the volume of the TV is set to 0, you will not be able to hear any sound, even if the volume of
the amplifier is at its highest level.
To connect a HDMI or a DVI device to the unit
The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital
video from a DVI device.
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate
analog audio cords required.
Rear and left of the unit
To PC/DVI
AUDIO IN
To HDMI IN
NOTE:
• When using HDMI1/DVI IN to connect your HDMI or DVI devices, you must select the corresponding
audio input source (HDMI or DVI) on the menu screen (see page 18). Otherwise you will only see the
image with no sound.
34
Rear of the unit
Audio cord (not supplied)
HDMI - to - DVI adapter cable
(HDMI type A connector)
HDMI cable (type A connector)
Amplifier
To Audio (L) Input
Audio cord (not supplied)
(not supplied)
(not supplied)
(continued)
To Audio (R) Input
To DVI output
DVI device
or
HDMI device
To HDMI output