Electrical Connections - Bush S322 Instruction Manual

ELECTRICAL CONNECTIONS

CONNECTING TO POWER
Check that the voltage marked on the product corresponds with your supply
voltage. This product is fitted with a 13A plug complying with BS1363. If this plug
is unsuitable or needs to be replaced, please note the following:
PLUG REPLACEMENT
If you need to replace the fitted plug:
WARNING
Never connect live or neutral wires to the earth terminal of the
plug. Only fit an approved 13 Amp BS1363/A plug and the correct
rated fuse. If in doubt, consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured as follows:
BlueNeutral
BrownLive
As the colours of the wires in the mains lead of this apparatus may not correspond
with the coloured markings identifying the terminals in your plug, proceed
as follows:
The wire which is coloured blue must be connected to the terminal, which is
marked with N or coloured blue. The wire which is coloured brown must be
connected to the terminal which is marked L or coloured brown. The green and
yellow wire must be connecting to the terminal marked with the letter E or the
earth symbol . Always ensure that the plug cord grip is fastened correctly.
If a 13A (BS1363) fused plug is used it must be fitted with a 3A fuse conforming
to BS1362 and be ASTA approved. If in doubt contact a qualified electrician.
P.05
WASTE ELECTRICAL PRODUCTS SHOULD NOT BE
DISPOSED OF WITH HOUSEHOLD WASTE. PLEASE
RECYCLE WHERE FACILITIES EXIST. CHECK
WITH YOUR LOCAL AUTHORITY FOR RECYCLING
ADVICE.