Table of Contents
Advertisement
Connecting external components to this unit
2
This example shows a way to connect a TV and Blu-ray disc player using the supplied cables. You can enjoy the
Example - B
multi-channel audio from the Blu-ray disc player and the analog/digital audio from the TV. Use the video pin cable
supplied with your Blu-ray disc player to make a video connection between your Blu-ray disc player and this unit.
TV
Video
Analog audio
Optical digital
input
output
output
R
L
1
2
1
SUB
WOOFER
COMPONENT
IN
OUT
AUX 1
VIDEO
AUDIO IN
Audio connection
This unit
To AC wall outlet
Preparing the remote control
3
Install batteries in the remote control.
Make sure you insert the batteries according to the polarity markings (+/–).
Pull the tab
Blu-ray disc player
Video
Video
input
output
2
Video connection
3
SIRIUS
SYSTEM
CONNECTOR
TV
AUX 2
AUX 1
TV
DIGITAL IN
IR IN
RS-232C
System connection
(supplied with Yamaha subwoofer)
Do not plug the power cable
5
into an AC wall outlet until all
connections are complete.
Connect cables in the order of the circled numbers.
Coaxial digital
output
1. Pull out the cap
(if attached)
4
2. Check the direction
• If you make a system connection, the power of the
subwoofer automatically changes in conjunction with
the power of this unit (Yamaha subwoofer).
• If you connect a subwoofer by wireless, refer to
"Wireless connection for subwoofer" described in
the left section.
Operation range
Within 6 m
(20 ft)
– –
Supplied
1 Video pin cable
(to display this unit's menu screen
on the TV)
2 Audio pin cable
(to play back TV analog sounds on
this unit)
3 Optical cable
(to play back TV digital sounds on
this unit)
4 Digital audio pin cable
(to input digital audio signals of the
Blu-ray disc to this unit)
5 Power cable
Subwoofer
INPUT
VOLUME
INTELLIBEAM MIC
30°
30°
Remote control
1
2
3
4
5
6
7
8
9
10
/0
11
/+10
12
Hide quick links:
Advertisement
Table of Contents
