Error Messages - Brother Simplicity SB7050E Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
APPENDIX

Error messages

When erroneous operations are performed messages and advice on operation will be displayed on the
LCD. Follow what is displayed. If you press
message is displayed, the message disappears.
No
Error Message
1
2
3
4
5
6
7
8
86
or do the operation correctly while the error
There is a possibility that the data for the selected pattern is corrupted.
The start/stop button was pressed at a screen other than the embroidery
screen.
Upper thread broken.
Upper thread not set up correctly.
Upper thread has run out.
CAUTION
Be sure to rethread the machine. If you press
without rethreading the machine, the thread tension may be wrong or
the needle may break and cause injury.
The machine is deleting a previously saved pattern while in embroidery
edit mode.
You attempted to select a pattern after the USB media containing the
pattern has been disconnected, then reconnected.
on the LCD was pressed when no card was inserted.
You retrieved a pattern while no USB media is connected.
You tried to use imcompatible USB media.
The start/stop button or thread cutter button was pressed while the
embroidery foot was raised.
Probable Cause
(Start/stop button)