Setting The Needle Up Stop Position And Needle Down Stop Position - Brother S-7220B Instruction Manual

8-6. Setting the needle up stop position and needle down stop position

Meaning of displays during setting
•
The stop position is set numerically, and "A"
to "F" represent the numbers "10" to "15"
respectively.
•
A setting value of "8" corresponds to an
angle of rotation of approximately 8° for the
upper shaft.
<Needle up stop position>
1
Becomes higher
3151M
2
<Needle down stop position>
1
Becomes lower
2
8. USING THE CONTROL BOX PANEL (ADVANCED OPERATIONS)
(Example: -8)
Becomes lower
(Example: 3)
Becomes higher
Display A
Value 10 11
1. Press the start backtack key (4) so that " ¯ " is displayed
in the top row of the stitch number display.
2. Press the end backtack key (2) to set the value.
Set DIP switch -3 to ON.
(The settings will be locked.)
1. Press the start backtack key (4) so that " - " is displayed
in the top row of the stitch number display.
2. Press the end backtack key (2) to set the value.
Set DIP switch -3 to ON.
(The settings will be locked.)
S-7220B
b c d
12 13
Becomes higher
Becomes lower
E F
14 15
3657M
3152M
34