Advanced Network Settings - D-Link DIR-626L Manual

Section 3 - Configuration
Enable UPnP: To use the Universal Plug and Play (UPnP
Enabled. UPnP provides compatibility with networking
equipment, software and peripherals.
WAN Ping:
Checking the box will allow the DIR-626L to respond
to pings. Unchecking the box may provide some extra
security from hackers.
WAN Ping Inbound Select from the drop-down menu if you would like to apply
Filter: the Inbound Filter to the WAN ping. Refer to the Inbound
Filters section for more information.
WAN Port Speed:
You may set the port speed of the Internet port to 10Mbps,
100Mbps, 1000Mbps, or Auto (recommended).
Enable IPV4 Check the box to allow multicast traffic to pass through
Multicast Streams: the router from the Internet (IPv4).
Enable IPV6 Check the box to allow multicast traffic to pass through
Multicast Streams:
the router from the Internet (IPv6).
D-Link DIR-626L User Manual

Advanced Network Settings

) feature click on
™
89