Displaying The Grid; Other New Features - Brother Quattro 6000D Operation Manual

DISPLAYING THE GRID

A grid can be displayed when the built-in camera is used
to display the needle position in the LCD.
Memo
• For details on using the built-in camera to display the
needle position, refer to "Checking the Needle Location
in the Screen" in the machine's Operation Manual.
a
Press .
→
The grid appears.
• To turn the grid off, press

OTHER NEW FEATURES

If an area is not selected while using the built-in
„
camera to align the embroidering position, scanning
will start from the center.
Note
• Scanning cannot start from the center after an area has
been selected. To scan from the center, press
close the window, then display the window again but do
not select an area to scan, then press
The image of the needle position displayed by the
„
built-in camera can be magnified by 200%.
The parameters in the Settings screens can also be
„
displayed in a language other than English.
Example: Deutsch (German) screen
When combining character patterns, the stitching
„
connecting patterns (jump stitches) are no longer
displayed in the preview so that the patterns can be
viewed more clearly.
.
Note
• Jump stitches may be displayed on the character.
to
.
3