Unpacking The Router; Additional Required Equipment - Cisco 1721 - VPN Security Router Bundle Hardware Installation Manual

Chapter 1 Cisco 1721 Router Overview

Unpacking the Router

Additional Required Equipment

78-13834-02
Processor board ID VEN0539000D (3033334544), with hardware revision
0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 Ethernet/IEEE 802.3 interface(s)
1 FastEthernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
1 Virtual Private Network (VPN) Modules(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x0
Table 1-5 lists the items that come with your router. All these items are in the
accessory kit that is inside the box that your router came in.
Table 1-5 Router Box Contents
Power cord (black)
•
Power supply
•
DB-25 to DB-9 adapter
•
Console cable, RJ-45 to DB-9 (light blue)
•
• Product documentation
Depending on your local network and on which Cisco WICs you install in your
router, you will require other items, listed in
installation.
Table 1-6, to complete your router
Cisco 1721 Router Hardware Installation Guide
Unpacking the Router
1-9