urations
Map Settings
From the Options&Settings menu, tap the Map Display button to select from the map interface options
listed below.
You can choose the following options for the main map:
Forward up
Use Larger Labels
Popup Menu
Use Automatic Zoom
Maneuver diagram
Next street bar
Zoom buttons
Compass
QuickNav Button
Volume Control
GPS Indicator
Power Indicator
Information Bar
Menu Button
About
From the Setup 2 menu, tap this button to displays version and copyright information.
Help
From the Setup 2 menu, tap this button to displays technical support information.
Orients the map so that the direction you are traveling is always at the top of the screen.
Increases the size of street names to make the map easier to read.
Displays the navigation popup menu when tapping on a map location.
When selected, the zoom is speed dependent. The map zooms out at higher speeds, displaying
a larger map area, and zooms in at slower speeds, displaying a smaller map area.
Displays a large image that indicates your next maneuver, such as left turn or right exit.
Displays the next street name.
Displays zoom in and zoom out buttons.
Displays the compass, which lets you change the map view display:
•
2D map view with the forward direction at the top
•
3D map view with the forward direction at the top
•
2D map view with North at the top
Displays the QuickNav button, which you tap to navigate to a pre-selected location
Displays the Volume Control bar.
Displays whether a reliable GPS signal has been located.
Displays if your device is plugged in or running on battery power.
Displays estimated time of arrival.
Displays the Menu button, which opens the main menu.
Config
26