Advertisement
Specifications
General
Power Supply
Power Consumption
Current Draw
Audio Power Output
Operating Temperature Range
Display System
Screen
Brightness
Contrast ratio
Backlight Life
Resolution
Video Format
Display Format
Troubleshooting
Symptoms
The Monitor is not on after the
vehicle is started?
No
video
signal
appears
while
reversing the vehicle?
Video image is not sharp enough?
DC12V
<10W
<800 mA
0.5W ×1 (16Ω)
0℃ to 50℃
4.5" TFT Color LCD
400 cd/㎡
150:1
10000 hours
960×234
NTSC/PAL
16 : 9
Solutions
1.
Check the installation-wiring diagram.
2.
Ensure that the parallel red and black line
is connected properly.
1.
Check the rearview Camera lens.
2.
Check the rearview Camera wiring and
connection.
3. Check that the cable from the control box
is connected properly to the monitor.
Clean the lens of the camera.
8
Cautions
The product is intended to assist in safe driving and to allow the driver to have
a broader rearview while the vehicle is in reverse. You, as the driver, are solely
responsible for the safe operation of your vehicle and the safety of your
passengers according to the country and their local traffic regulations. Do not
use any features of this system to the extent it distracts you from safe driving.
Your first priority while driving should always be the safe operation of your
vehicle. Audiovox Electronics Corporation cannot accept any responsibility
whatsoever for accidents resulting from failure to observe these precautions or
safety instructions.
1. This product utilizes high voltage. Any unauthorized modifications or
damage to the products may result in electrical shock. Handle all
components with care. Inspect regularly for damage to components
and cabling.
2. You shall be responsible to ensure that the installation of this product
does not void or affect the vehicle manufacturer's warranty. Audiovox
Electronics Corporation or its branches are not liable in full or in part
for improper installation resulting in loss or damage to your property,
or for voiding all or part of the vehicle manufacturer's warranty.
3. Do not apply excessive force to any of the components contained
within this kit. Excessive force used before, during or after installation
that results in a damaged or non-functional part shall void all
warranties.
4. Please follow the procedure from this installation manual. Improper
installation or modification of this product shall void all warranties.
PACKING LIST
The LCM45NB consists of the following items:
1. LCD Monitor-1
2. Control Box-1
3. Power Harness-1
4. Camera Cable-2
5. Monitor Extension Cable-1
6. Mounting screws-4
1
Advertisement
