Brother PE-780D Operation Manual page 46

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
EMBROIDERY
c Press the inner frame in from the top of the
fabric.
Line up on the inner frame and
outer frame.
Tighten the adjustment screw by hand just
d
enough to secure the fabric.
e Gently remove the fabric from the frame
without loosening the adjustment screw.
Memo
This precautionary step will help reduce
pattern distortion while embroidering.
44
f Press the inner frame in from the top of the
fabric again, lining up
on and
a Outer frame
b Inner frame
c Fabric (right
d Stabilizer material
e Ledge of outer frame
• Press down firmly until the inner frame is
securely pressed against the ledge of the
outer frame.
g Tighten the adjustment screw while removing
any slack in the fabric by hand. The goal is to
have a drum-like sound when the stretched
fabric is struck lightly.
on the inner frame
on outer frame.
3
1 2
5 4
side
)