HP ProLiant DL360p Reference Manual page 53

For example:
controller slot=3
controller wwn=500805F3000BAC11
controller slot=2 array A
controller chassisname="A" array B logicaldrive 2
controller chassisname="A" physicaldrive 1:0
controller all
controller slot=2 array all
controller slot=3 physicaldrive 1:2-1:5
The <command> variable
The <command> variable can be any of the following words or phrases, corresponding to typical
configuration tasks:
add
create
delete
modify
remove
set target
Nonconfiguration commands are also available:
("Generating a diagnostic
diag
("The help
help
rescan
shorthand
show ("The show
version
56)
A command often requires a parameter, and some parameters require a value, but the specific parameters
and values that are valid for a given command depend on the target to which you apply the command.
To determine the valid parameters and values for a particular combination of target and command variables,
you can query the device
in other sections of this guide.
Querying a device
If you do not know what values a parameter can have, you can sometimes query the device to find out by
entering a ? as the value of the parameter.
Example command:
=> ctrl ch="Lab4" ld 1 modify raid=0 ss=?
A typical screen response in this case could be:
Available options are:
8
16 (current value)
32
64
128 (default)
256
command" on page 57)
("Rescanning the system" on page 60)
("Keyword abbreviations" on page 54)
command" on page 54)
("Displaying the current versions of the application
("Querying a
report" on page 59)
device" on page 53). You can also inspect the example commands
layers" on page
HP Array Configuration Utility 53