Mass Storage Devices - Compaq Mini CQ10-100 - PC Maintenance And Service Manual

Mass storage devices

NOTE:
Each hard drive spare part kit includes a cable and bracket.
Description
Hard drive
160 GB, 5400 RPM
Hard drive mounting kit
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
If your computer has WWAN capability, remove the SIM (see
6.
Remove the keyboard (see
To remove the hard drive:
1. Loosen the Phillips PM2.5×10.0 captive screw (1), and remove the 2 Phillips PM2.0×3.0 screws
(2) that secure the assembly to the computer.
2. Use the Mylar tab to slide the assembly to the left (3) to disconnect it, and remove the
assembly (4).
Continue with one of the following sections for hard drive or solid-state drive replacement.
Battery on page 35).
Keyboard on page 39).
Spare part number
594809-001
537641-001
SIM on page 36).
Component replacement procedures
43