Hardware Support; Hp Driver And Support Software Prerequisites - HP ProLiant BL30p User Manual

Operating System
Windows Unified Data
Storage Server® 2003
x64 Editions
Windows Unified Data
Storage Server® 2003
R2 x64 Editions
Windows® Web
Server 2008
Windows Server®
2008 Standard 32-bit
Edition
Windows Server®
2008 Enterprise 32-bit
Edition
Windows Server®
2008 Datacenter 32-Bit
Edition
Windows Server®
2008 Standard Edition
Windows Server®
2008 Enterprise Edition
Windows Server®
2008 Datacenter
Windows® Essential
Business Server 2008
Windows® Small
Business Server 2008

Hardware support

For a list of supported ProLiant server platforms and options, see the hardware support matrix
(http://www.hp.com/go/hpwbem).

HP driver and support software prerequisites

You must install PSP 8.20 (or later) before or during installation of version 2.3.0.0 of the Insight Providers.
Version 2.3.0.0 of the Insight Providers depend on storage and network drivers in PSP 8.20 (or later) to
support installed storage and network options. In addition, the System Management Controller and Lights-
Out Interface drivers are required. These drivers are provided with PSP 8.20.
PSPs are available from the HP software and drivers website
(http://welcome.hp.com/country/us/en/support.html) and from the SmartStart CDs.
NOTE:
do not want SNMP agents installed, uninstall them after installing the PSP.
Comments
—
—
—
—
—
—
—
—
—
—
—
Installing the PSP also installs the SNMP-based HP Insight Management Agents. If you
Support information 35