Sweep Shooting - Sony Cyber-shot DSC-RX100 User Manual

Cyber-shot User Guide
Before Use
Shooting
Viewing
Using MENU items (Shooting)
Using MENU items (Viewing)
Changing settings
Viewing images on a TV
Using with your computer
Printing
Troubleshooting
Precautions/About this camera
Contents list

Sweep Shooting

Allows you to create a panoramic image from composite images.
1. Set the mode dial to
(Sweep Shooting).
2. Align the camera with the end of the subject to be shot and press the shutter button fully.
A: This part will not be recorded.
3. Pan the camera to the end of the guide (B), following the indicator on the screen.
Tips for shooting a panoramic image
Pan the camera in an arc at a constant velocity in the direction indicated on the screen. Subjects at
rest are more suited for panoramic shots than moving subjects.
Radius as short as possible.
Vertical direction
Horizontal direction
First press the shutter button halfway so that you can lock the focus, exposure and white balance.
Then press the shutter button fully down and pan or tilt the camera.
If a section with greatly varied shapes or scenery is concentrated along a screen edge, the image
composition may fail. In such a case, adjust the frame composition so that the section is in the
GB 45
Top page > Shooting > Setting REC mode > Sweep Shooting