Installing Linked Pci Express Graphics Cards - Intel DZ68ZV Product Manual

To install two linked PCI Express graphics cards:
1. Observe the precautions in "Before You Begin" on page 31.
2. Install the first card in the PCI Express x16 connector as described in "Installing a
PCI Express x16 Graphics Card" on page 44.
3. Place the second card in the secondary PCI Express x16 connector (Figure 22, A)
and press down on the card until it is completely seated in the connector and the
card retention notch on the card snaps into place around the retention mechanism
pin on the connector.
4. Secure the card's metal bracket to the chassis back panel with a screw
(Figure 22, B).
5. Connect the two cards together with the SLI bridge (Figure 22, C) as shown.
6. Connect the monitor cable to the graphics card according to the manufacturer's
instructions.
Figure 22. Installing Linked PCI Express Graphics Cards
For more complete installation and configuration information refer to the
documentation supplied by the graphics card manufacturer or visit their website.
Installing and Replacing Desktop Board Components
47