Intel DZ68ZV Product Manual page 17

NOTE
The SATA Drive Mode must be set to RAID in the BIOS Setup in order for your
system to use Intel Smart Response Technology. Once RAID is enabled, you can
install the operating system and the Intel Rapid Storage Technology driver. If
the operating system was already installed with the SATA Drive Mode set to
AHCI, you must reinstall the operating system with the SATA Drive Mode set to
RAID. Refer to Section 4, "Configuring Intel Smart Response Technology and
RAID Using Intel
For more information on Intel Smart Response Technology refer to
http://download.intel.com/design/flash/nand/325554.pdf
Response Technology User Guide at
http://www.intel.com/support/motherboards/desktop/dz68db/sb/CS-
032499.htm?wapkw=(smart+response)
®
RST", on 71 for more information.
Desktop Board Features
or download the Intel Smart
17