Front Panel Usb 2.0 Headers; S/Pdif Header; Front Panel Usb 2.0 Headers Signal Names - Intel DQ67OW Product Manual

Front Panel USB 2.0 Headers

Figure 22, H shows the location of the front panel USB 2.0 headers and Table 13
shows the pin assignments and signal names.
Table 13. Front Panel USB 2.0 Headers Signal Names
Pin Signal Name
1 Power (+5 V)
3 D-
5 D+
7 Ground
9 Key
NOTE
Computer systems that have an unshielded cable attached to a USB port might not
meet FCC Class B requirements, even if no device or a low-speed USB device is
attached to the cable. Use a shielded cable that meets the requirements for a
full-speed USB device.

S/PDIF Header

Figure 22, I shows the location of the S/PDIF output header. Table 14 shows the pin
assignments and signal names for the S/PDIF output header.
Table 14. S/PDIF Header Signal Names
Pin Description
1 Ground
2 S/PDIF Out
3 Key (no pin)
4 +5 VDC
Installing and Replacing Desktop Board Components
Pin Signal Name
2 Power (+5 V)
4 D-
6 D+
8 Ground
10 No Connection
55