Discard Changes; Restore Defaults; Save As User Defaults; Restore User Defaults - Intel DH61SKCH Product Manual

Intel desktop board dh61skch product guide

Hide thumbs Also See for DH61SKCH:

Table of Contents

Intel H61-ITX series Motherboard

Discard Changes

This option allows you to discard the selections you have made and restore the previ-

ously saved values. When the dialog box [Load Previous Values?] appears, select

[Yes] to discard any change and load the previously saved values.

Use this item to restore/load default values for all the setup options.

Use this item to save the changes as User Defaults.

Use this item to restore the User Defaults to all the setup options.

Use this item to launch EFI Shell application (Shellx64.efi) from one of the available

filesystem devices.

The program EFUDOS.exe is included in the driver disk (X:\Utility\EFUDOS.exe). Please follow

the recommended procedure to update the flash BIOS, as listed below.

(X: your driver disk letter).

1. Create a DOS-bootable floppy diskette. Copy the new BIOS file (just obtained or downloaded)

and the utility program EFUDOS.exe to the diskette.

2. Allow the PC system to boot from the DOS diskette.

3. At the DOS prompt, type

EFUDOS XX.ROM /P /B /N <ENTER>

Note: XX (the BIOS file name) can be defined by users.

4. Wait until the flash-update is complete.

5. Restart the PC.

Warning: - Do not turn off or RESET the computer during the flash process.

- If you are not sure how to upgrade the BIOS, please take your computer to an

Authorized Service Center and have a trained technician do the work for you.

Table of Contents