Creating A Raid Set - Asus Z8PE-D12X - Motherboard - SSI EEB 3.61 User Manual

5.3.1

Creating a RAID set

To create a RAID set
1. From the utility main menu, select 1. Create RAID Volume and press
<Enter>. The following screen appears.
Intel(R) Matrix Storage Manager option ROM v8.5.0.1030 ICH10R/DO wRAID5
[↑↓]Change
2. Enter a name for the RAID set and press <Enter>.
3. When the RAID Level item is selected, press the up/down arrow key to select
a RAID level to create, and then press <Enter>.
4. When the Disks item is selected, press <Enter> to select the hard disk drives
you want to include in the RAID set. The SELECT DISKS screen appears.
Port Drive Model
0 ST3160812AS
1 ST3160812AS
2 ST3160812AS
3 ST3160812AS
[ ↑↓ ]-Prev/Next [SPACE]-SelectDisk [ENTER]-Done
5. Use the up/down arrow key to select a drive, and then press <Space>
to select. A small triangle marks the selected drive. Press <Enter> after
completing your selection.
5-26
Copyright(C) 2003-08 Intel Corporation.
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Sync:
Enter a unique volume name that has no special characters and is
[TAB]-Next
[ SELECT DISKS ]
Serial #
9LS0HJA4
9LS0F4HL
3LS0JYL8
9LS0BJ5H
Select 2 to 6 disks to use in creating the volume.
[ CREATE VOLUME MENU
Volume0
RAID0(Stripe)
Select Disks
128KB
0.0 GB
N/A
Create Volume
[ HELP ]
16 characters or less.
[ESC]-Previous Menu
Size Status
149.0GB Non-RAID Disk
149.0GB Non-RAID Disk
149.0GB Non-RAID Disk
149.0GB Non-RAID Disk
All Rights Reserved.
]
[ENTER]-Select
Chapter 5: RAID configuration