Dram Memory Installation Procedures - Asus VX97 User Manual

III. INSTALLATION

DRAM Memory Installation Procedures:

1. The SIMM memory modules will only fit in one orientation as shown because
of a "Plastic Safety Tab" on one end of the SIMM slots which requires the
"Notched End" of the SIMM memory modules.
72 Pin SIMM Sockets
2. Press the memory module firmly into place starting from a 45 degree angle
making sure that all the contacts are aligned with the socket.
3. With your finger tips, rock the memory module into a vertical position so that it
clicks into place.
Support Clip
Safety Tab (This Side Only)
4. The plastic guides should go through the two "Mounting Holes" on the sides and
the "Metal Clips" should snap on the other side.
5. To release the memory module, squeeze both "Metal Clips" outwards and rock
the module out of the "Metal Clips".
1 2 3 4
Bank 0
72 Pin DRAM in SIMM Socket
ASUS VX97 User's Manual
DRAM Memory
Module Example
Notched End
Bank 1
Mounting Hole
17