Jumper Settings For The Bios Setup Program Modes - Intel D945GCCR Product Manual

Intel Desktop Board D945GCCR Product Guide
The three-pin BIOS jumper block enables all board configurations to be done in the
BIOS Setup program. Table 10 shows the jumper settings for the BIOS Setup
program modes.
Table 10. Jumper Settings for the BIOS Setup Program Modes
Jumper
Setting
52
Mode
Normal (default) (1-2)
Configure (2-3)
Recovery (None)
Description
The BIOS uses the current configuration and
passwords for booting.
After the Power-On Self-Test (POST) runs, the
BIOS displays the Maintenance Menu. Use this
menu to clear passwords.
The BIOS recovers data in the event of a failed
BIOS update.