Errata - Intel D925XECV2 Specification

ERRATA

1. Alert Standard Format (ASF) is Non-Functional
P :
BIOS and device driver support is currently not implemented to support Alert
ROBLEM
Standard Format (ASF).
I :
ASF, an interface that provides access and manageability in OS-absent
MPLICATION
environments, is currently not supported.
W :
None.
ORKAROUND
S :
This erratum may be fixed in a future BIOS and driver revision.
TATUS
2. BIOS Corruption May Occur if Power is Interrupted
During the BIOS Flash Procedure, Resulting in the
System's Inability to POST
P :
Power interruption during BIOS flash process may corrupt certain non-bootblock
ROBLEM
areas in the Firmware Hub.
I :
If power fails during the flash process, the new BIOS image should be
MPLICATION
preserved. In some instances, a power failure during the flash process may instead cause
corruption and not save the new image to the Firmware Hub resulting in a no POST condition; a
POST card will indicate a halt at POST code D7h.
W :
If power fails during the BIOS flash process and a no POST condition exists
ORKAROUND
upon subsequent boot, implementing the BIOS flash recovery procedure will return the BIOS to
a stable state.
S :
This erratum may be fixed in a future BIOS revision.
TATUS
3. Wake On LAN May Not Function After Loss and Restore
of AC Power
P :
If AC power is removed, Wake On LAN may not function until the LAN circuit is re-
ROBLEM
initialized. The sequence of events is as follows:
• AC power removed (AC power cord disconnected, for example)
• AC power restored. +5V Standby voltage is re-applied to the board
• Wake On LAN may not be functional
• Switch power on
• Switch power off to put system back into Standby mode (S5 state)
• Wake On LAN functionality restored
I :
Wake on LAN will not function if AC power is interrupted.
MPLICATION
®
Intel Desktop Board D925XECV2 Specification Update
5