Main Memory; Intel ® 915Gv Express Chipset - Intel D915GVWB Product Manual

Intel Desktop Board D915GVWB Product Guide

Main Memory

NOTE
To be fully compliant with all applicable Intel
be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. If your
memory modules do not support SPD, you will see a notification to this effect on the screen at
power up. The BIOS will attempt to configure the memory controller for normal operation.
The desktop board supports:
•
Four 184-pin Double Data Rate (DDR) SDRAM Dual Inline Memory Module (DIMMs)
connectors with gold-plated contacts
•
Unbuffered, non-registered single or double-sided DIMMs
•
Serial Presence Detect (SPD) memory only
•
Non-ECC RAM
•
2.5 V memory
•
Memory configuration listed below:
⎯ Up to 1.0 GB utilizing 256 Mb technology
⎯ Up to 4.0 GB utilizing 512Mb or 1 GB technology
NOTE
System resources (such as PCI and PCI Express) require physical memory address locations that
reduce available memory addresses above 3 GB. This may result in less than 4 GB of memory
being available to the operating system and applications.
Related Links:
Go to the following links or pages for more information about:
•
The latest list of tested memory,
•
SDRAM specifications,
•
Installing memory, page 32 in Chapter 2
®
Intel 915GV Express Chipset
The Intel 915GV Express Chipset consists of the following devices:
•
Intel 82915GV Graphics and Memory Controller Hub (GMCH) with Digital Media Interface
•
Intel 82801FB I/O Controller Hub (ICH6)
Related Link:
Go to the following link for more information about the Intel 915GV Express Chipset:
http://developer.intel.com/design/nav/pcserver.htm
14
®
SDRAM memory specifications, the board should
http://support.intel.com/support/motherboards/desktop/
http://www.intel.com/technology/memory/pcsdram/spec/