Ez Mode - Asus RAMPAGE IV EXTREME User Manual

3.2.2

EZ Mode

The EZ Mode provides you an overview of the basic system information, and allows you to
select the display language, system performance mode and boot device priority. To access
the Advanced Mode, click Exit/Advanced Mode, then select Advanced Mode.
The default screen for entering the BIOS setup program can be changed. Refer to the
Setup Mode item in section
Displays the CPU/motherboard temperature,
CPU/5V/3.3V/12V voltage output, CPU/
Chassis/CPU_OPT fan speed
Selects the boot device priority
Displays the system properties of the
selected mode on the right hand side
•
•
3-4
section 3.7 Boot memu for details.
Selects the display language of
the BIOS setup program
Power Saving mode
The boot device options vary depending on the devices you installed to the system.
The Boot Menu(F8) button is available only when the boot device is installed to the
system.
Exits the BIOS setup program without saving the
changes, saves the changes and resets the system,
or enters the Advanced Mode
Loads optimized default
Normal mode
Clicks to display all fan
speeds if available
ASUS Optimal mode
Chapter 3: BIOS setup