1.11 Power Management; Acpi; Effects Of Pressing The Power Switch - Intel D33217GKE Specification

Intel Desktop Board D33217GKE Technical Product Specification

1.11 Power Management

Power management is implemented at several levels, including:
Software support through Advanced Configuration and Power Interface (ACPI)
•
Hardware support:
•
 Power Input
 Instantly Available PC technology
 LAN wake capabilities
 Wake from USB
 WAKE# signal wake-up support
 Wake from S5
 +5 V Standby Power Indicator LED
1.11.1

ACPI

ACPI gives the operating system direct control over the power management and Plug
and Play functions of a computer. The use of ACPI with this board requires an
operating system that provides full ACPI support. ACPI features include:
Plug and Play (including bus and device enumeration)
•
• Power management control of individual devices, add-in boards (some add-in
boards may require an ACPI-aware driver), video displays, and hard disk drives
Methods for achieving less than 15-watt system operation in the power-on/standby
•
sleeping state
A Soft-off feature that enables the operating system to power-off the computer
•
Support for multiple wake-up events (see Table 9 on page 32)
•
Support for a front panel power and sleep mode switch
•
Table 7 lists the system states based on how long the power switch is pressed,
depending on how ACPI is configured with an ACPI-aware operating system.
Table 7. Effects of Pressing the Power Switch
If the system is in this
state...
Off
(ACPI G2/G5 – Soft off)
On
(ACPI G0 – working state)
On
(ACPI G0 – working state)
Sleep
(ACPI G1 – sleeping state)
Sleep
(ACPI G1 – sleeping state)
Note: Depending on power management settings in the operating system.
30
...and the power switch is
pressed for
Less than four seconds
Less than four seconds
More than six seconds
Less than four seconds
More than six seconds
...the system enters this state
Power-on
(ACPI G0 – working state)
Soft-off/Standby
(ACPI G1 – sleeping state)
Fail safe power-off
(ACPI G2/G5 – Soft off)
Wake-up
(ACPI G0 – working state)
Power-off
(ACPI G2/G5 – Soft off)
Note