Setting Amount Of Rinse Aid - Bosch SPS59L12GB Operating Instructions Manual

en Rinse aid
1. Open the dispenser 1j by pressing
and lifting the plate on the cover.
2. Carefully pour rinse aid up
to the max. mark in the filler opening.
3. Close cover until it clicks shut.
4. To prevent excessive foam formation
during the next rinse cycle, remove
any rinse aid which has run over with
a cloth.
12

Setting amount of rinse aid

The amount of rinse aid can be set from
:
:
( :
Do not change the amount of rinse aid
unless streaks (select lower setting)
or water stains (select higher setting)
are left on the utensils.
1. Close the door.
2. Switch on ON/OFF switch (.
3. Hold down programme button #
and press START button h
until : ... is indicated on the digital
display.
4. Release both buttons.
The LED for button # flashes
and the digital display )* displays
the factory setting :
5. Press programme button # until
the factory set value :
is indicated on the digital
PD[
display )*.
To change the setting:
1. Press programme button 3.
Each time the button is pressed,
the set value increases by one level;
when the value of :
reached, the display jumps back
to
2. Press START button h.
The set value is saved.
to : . Please set rinse aid on
to obtain very good drying results
is already set in factory).
: (off).
.
has been