Eco - Sony Bravia KLV-32BX300 Operating Instructions Manual

HDMI Set-up
Auto Start-up
Language
Product Information
Factory Settings

Eco

Power Saving
Idle TV Standby
PC Power
Management
26
GB
Allows the TV to communicate with equipment that is compatible with the Control for
HDMI function, and connected to the HDMI jacks of the TV. Note that communication
settings must also be made on the connected equipment.
"Control for HDMI"
Sets whether or not to link the operations of the TV and the connected equipment that
is compatible with Control for HDMI. When set to "On", the following functions are
available.
If the specific Sony equipment that is compatible with Control for HDMI is connected,
this setting is applied to the connected equipment automatically when the "Control for
HDMI" is set to "On" using the TV.
"Auto Devices Off"
When this is set to "On", the connected equipment that is compatible with Control for
HDMI turns off when you turn off the TV by remote.
"Auto TV On"
When this is set to "On", the TV turns on when you turn on the connected equipment
that is compatible with Control for HDMI.
"HDMI Device List"
Displays a list of connected equipment that is compatible with Control for HDMI.
Selects "Enable" to update the "HDMI Device List".
"Device Control Keys"
Select button functions of the TV's remote control to operate the connected equipment.
"Normal": For basic operations, such as navigation buttons (up, down, left or right,
etc).
"Tuning Keys": For basic operations and operation of channel-related buttons, such as
PROG +/– or (0-9), etc. Useful when you control a tuner or set-top box, etc; via the
remote control.
"Menu Keys": For basic operations and operation of the MENU/TOOLS buttons.
Useful when you select menus of a BD player, etc; via the remote control.
"Tuning and Menu Keys": For basic operations and operation of channel-related
buttons and MENU/TOOLS button.
• You cannot use "Control for HDMI" if the TV operations are linked to the operations of an
audio system that is compatible with Control for HDMI.
• Some equipment with "Control for HDMI" does not support the "Device Control" feature.
Starts the initial set-up procedure (page 6). This option allows you to retune the TV after
moving house, or to search for new channels that have been launched by broadcasters.
Selects the language in which the menus are displayed.
Displays your TV's product information.
Resets all settings to factory settings. After completing this process, the initial set-up
screen is displayed.
• Be sure not to turn the TV off during this period (it takes about 30 seconds) or press any
buttons.
Reduces power consumption of the TV by adjusting the backlight.
When you select "Picture Off", the picture is switched off, and the
indicator on the TV front panel lights up in green. The sound remains unchanged.
Turns the TV off after it has been kept idle for the preset length of time.
Switches the TV to standby mode when the TV receives no signal from the PC input
source for 30 seconds.
(Picture Off)