HP D7171A - NetServer - LPr Manual page 7

further assistance.
2F5 DMA test failed
This error will occur if the system board DMA test fails. If this test
fails, the system board floppy will not work correctly. If the error
persists, the system board may need to be replaced. Call your HP
service representative for further assistance.
2F6 Software NMI failed
This error will occur if the system tried to generate a software
NMI by writing to the register to generate an NMI. Since the HP
NetServer LXr Pro8 does not support EISA, this error should not
happen. Even if this error does occur, it should not affect system
operation.
2F7 Fail-safe timer NMI failed
This error will occur if the EISA fail-safe timer failed to generate
an NMI. Since the HP NetServer LXr Pro8 does not support EISA,
this error should not happen. Even if this error does occur, it
should not affect system operation.