Introduction; Verifying Contents; Prepare For Installation; Tools You Need - HP D7171A - NetServer - LPr Installation Manual

Power supply upgrade kit

Hide thumbs Also See for D7171A - NetServer - LPr:

Table of Contents

1 Introduction

The contents of the shipping box include:

Power supply module (PSM)

Power supply fan module

Filler panel for the empty bay

Power supply cage

Gather the tools and the setup information you need to install the power supply

module, cage, and fan module before removing them from their packaging.

To install this accessory kit, you need the following tools:

A slotted head screwdriver, or Torx

An anti-static service kit (3M

includes a static-dissipating work surface, a chassis clip lead, and a wrist

strap.

The Power Supply Upgrade Kit installation procedure is as follows:

1. Remove the HP NetServer front bezel and covers (Chapter 1).

2. Install the cage for the redundant power supply module (Chapter 2).

3. Install the redundant power supply module (Chapter 2).

4. Install the filler panel (Chapter 2).

5. Install an additional fan module in front of the existing power supply fan

module (Chapter 3).

6. Replace the HP NetServer covers (Chapter 1).

screwdriver.

8501/8502/8503 or equivalent). This kit

Table of Contents